Ping - Cisco MGX 8850 Command Reference Manual

ping

ping
Ping
Use ping to determine if a host is operational. The command causes the switch to send an ICMP packet
to a destination address.
Cards on Which This Command Runs
PXM45
Syntax
ping <IP_Addr>
[<Num_Packets>]
Syntax Description
IP_Addr
Num_Packets
Related Commands
None
Attributes
Log: no log
Example
Ping IP address 172.29.23.148.
MGX8850.7.PXM.a > ping 172.29.23.148
PING 172.29.23.148: 56 data bytes
64 bytes from 172.29.23.148: icmp_seq=0. time=0. ms
64 bytes from 172.29.23.148: icmp_seq=1. time=0. ms
64 bytes from 172.29.23.148: icmp_seq=2. time=0. ms
----172.29.23.148 PING Statistics----
3 packets transmitted, 3 packets received, 0% packet loss
round-trip (ms)
Cisco MGX 8850 Routing Switch Command Reference
1-24
IP address of the destination host in dotted decimal format.
Number of packets. The range is 0–65535.
• 0=infinite
• 3=default
State: active, standby Privilege: ANYUSER
min/avg/max = 0/0/0
Chapter 1 Command Line Interface Overview
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001