Dspcdbucketcnt - Cisco MGX 8850 Command Reference Manual

dspcdbucketcnt

dspcdbucketcnt
Display Cell Counts for the Card
The dspcdbucketcnt command shows the following cell-related counts:
•
•
•
•
•
In addition to the other bucket command on the AXSM (dsplnbucketcnt), the display commands for the
switch planes on the PXM45 may help you analyze cell flows. (See the dspxbar-type commands.)
Cards on Which This Command Runs
AXSM
Syntax
dspcdbucketcnt
Syntax Description
This command takes no parameters.
Related Commands
dsplnbucketcnt, all the dspxbar-type of commands except dspxbarstatus
Attributes
Log: no log
Example
Display the bucket counters for the current AXSM.
MGX8850.12.AXSM.a > dspcdbucketcnt
Cisco MGX 8850 Routing Switch Command Reference
9-66
Cells transferred between the card and the backplane
Cells from the QE 48
CLP0 and CLP1 cells that the card dropped
Invalid, errored, and unsupported OAM cells
Errored RM cells
State: active, standby
cells to backplane(QLSI) : 0
cells from QE 48 : 5347
cells from backplane(QLSI) : 6917
CLP0 cells dropped : 0
CLP1 cells dropped : 0
undefined cells from port : 0
errored OAM from port : 0
invalid OAM from port : 0
unsupported OAM from port : 0
errored RM cells from port :0
Chapter 9
Privilege: ANYUSER
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
Troubleshooting Commands