Dsppvcif - Cisco MGX 8850 Command Reference Manual

Chapter 2 Shelf Management Commands

dsppvcif

Display PVC Interface
Display details about the PVC interface for IP connectivity. The output shows the:
•
•
•
•
•
•
Cards on Which This Command Executes
PXM45
Syntax
dsppvcif
Syntax Description
This command takes no parameters.
Related Commands
dspipif, pvcifconfig, ipifconfig, dspipifcache
Attributes
Log: no log
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
Interface type on which the PVC connections exists. Possible types are:
ATM (atm0 in the output)
–
– Ethernet (lnPcio0 in the output)
– SLIP interface (sl0 in the output)
Alarms, if any
The operational state
Flags specified for the PVC support (through the pvcifconfig command)
The number of logical connection numbers (LCNs) in the receive and transmit direction)
Numbers in input and output frames
State: active, standby, init Privilege: ANYUSER
Cisco MGX 8850 Routing Switch Command Reference
dsppvcif
2-61