Cisco MGX 8850 Command Reference Manual page 22

Tables
Table 6-3 Maximum Connections on Back Cards and Lines
Table 6-4 Mapping PNNI Port ID to AXSM Elements
Table 7-1 Valid Line Numbers and Number of Bays for AXSM Card Types
Table 7-2 Maximum Connections by Connection Type and Front Card
Table 7-3 Maximum Connections on Back Cards and Lines
Table 7-4 Mapping PNNI Port ID to AXSM Elements
Table 7-5 Default Traffic Parameters for AXSM
Table 7-6 Ranges for PCR, SCR, and MCR for Each Line Type
Table 8-1 Valid Line Numbers and Number of Bays for AXSM Card Types
Table 8-2 Maximum Connections by Connection Type and Front Card
Table 8-3 Maximum Connections on Back Cards and Lines
Table 8-4 Mapping PNNI Port ID to AXSM Elements
Table 8-5 Interface Load Info Descriptions
Table 9-1 Valid Line Numbers and Number of Bays for AXSM Card Types
Table 9-2 Mapping PNNI Port ID to AXSM Elements
Table 9-3 Reasons for Change of Clock State
Cisco MGX 8850 Routing Switch Command Reference
xx
6 - 3
6 - 5
7 - 3
7 - 3
7 - 4
7 - 7
7 - 8
8 - 2
8 - 3
8 - 4
8 - 13
9 - 3
9 - 82
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
7 - 2
8 - 2
9 - 2