Dspilmicnt - Cisco MGX 8850 Command Reference Manual

dspilmicnt

dspilmicnt
Display ILMI Counters
Displays the ILMI counters for a particular resource partition on a particular logical port.
Cards on Which This Command Runs
AXSM
Syntax
dspilmicnt <ifNum> <partId>
Syntax Description
ifNum
partId
Related Commands
cnfilmi, dspilmi, dspilmis, clrilmicnt, dnilmi, upilmi
Attributes
Log: no log
Example
Display the ILMI counters for logical port 1 on the current AXSM card.
pinnacle3.1.2.AXSM.a > dspilmicnt 1
Port Num:
SNMPPDUsReceived:
Get RequestsReceived:
GetNextRequestsReceived:
SetRequestsReceived:
TrapReceived:
GetResponseReceived
GetResponseTransmitted:
GetRequestTransmitted:
TrapsTransmitted:
InvalidPDUReceived:
Asn1ParseError:
NoSuchNameError:
TooBigError:
Cisco MGX 8850 Routing Switch Command Reference
9-110
The logical port number. The range for AXSM is 1–60.
The number of the resource partition. The range is 1–20.
State: active, standby
1
0
0
0
0
0
0
0
0
0
0
0
0
0
Chapter 9 Troubleshooting Commands
Privilege: ANYUSER
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001