Dspxbarmgmt - Cisco MGX 8850 Command Reference Manual

dspxbarmgmt

dspxbarmgmt
Display Crossbar Management—display the load sharing configuration.
The dspxbarmgmt command shows details about the load sharing configuration for the node. See the
cnfxbarmgmt description for an explanation.
Cards on Which This Command Runs
PXM45
Syntax
dspxbarmgmt
Syntax Description
This command takes no parameters.
Related Commands
cnfxbarmgmt
Attributes
Log: no log
Example
Display the crossbar management state for the current node. The settings are the defaults.
pop20two.7.PXM.a > dspxbarmgmt
pop20two
MGX8850
Load Sharing: Enable
Auto Shutdown: Disable
Plane Alarm Threshold: 3
Cisco MGX 8850 Routing Switch Command Reference
9-140
State: active, standby, init
System Rev: 02.01
Chapter 9 Troubleshooting Commands
Privilege: ANYUSER
Dec. 05, 2000 20:43:43 GMT
Node Alarm: MAJOR
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001