Dsppncon - Cisco MGX 8850 Command Reference Manual

Chapter 7 SPVC and SVC Commands

dsppncon

Display PNNI Connection—display information about an existing call.
Displays information for an active SVC, SPVC, or SPVP. The displayed call information corresponds
to the objects described in the portCallTable and portAbrCallTable MIBs. This command can be
issued at any node in the route path.
Cards on Which This Command Runs
PXM45
Syntax
dsppncon <portid> <vpi> <[vci]>
Syntax Description
portid
vpi
vci
Related Commands
dsppncons
Attributes
Log: no log
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
The portid represents the PNNI physical port and has the format
[shelf.]slot[:subslot].port[:subport]. See also
VPI for the call. Default = 0.
VCI for the call. If no VCI is specified, this is a VP connection. Default = 0.
State: active, standby
PNNI Format, page
Privilege: ANYUSER
Cisco MGX 8850 Routing Switch Command Reference
dsppncon
7-4.
7-49