Cisco MGX 8850 Command Reference Manual page 447

Chapter 6 Logical Node, Port, and Signaling Commands
-connpendhi
-incompjour
-vsiqmild
-vsiqmedium
-vsiqsevere
Related Commands
dspnodalcongth
Attributes
Log: log
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
The aggregate number of connections in the establishment phase above which the
establishment congestion state is flagged.
Range: 1–1000 connections
Default: 500 connections
The number of incomplete journaling cycles that must be exceeded to trigger an
increase in the journaling rate.
Range: 1–10 cycles
Default: 5 cycles
The VSI Q depth above which VSI master is mildly congested. The mildCongPerc
value is a percentage of VSI master-slave communication window size. This
threshold applies to all the PNNI logical ports on the node.
Range: 1–175
Default: 5
The VSI Q depth above which VSI master is congested at a medium level. The
mediumCongPercis value is a percent of VSI master-slave communication window
size.This threshold applies to all interfaces on the node.
Range: 1–175
Default: 10
The VSI Q depth above which VSI master is severely congested. The
severeCongPerc value is a percent of VSI master-slave communication window size.
This threshold applies to all interfaces on the node.
Range: 1–175
Default: 20
State: active Privilege: SUPER_GP
Cisco MGX 8850 Routing Switch Command Reference
cnfnodalcongth
6-29