Dsplncnt - Cisco MGX 8850 Command Reference Manual

Chapter 9 Troubleshooting Commands

dsplncnt

Display Line Counters—display the contents of counters for various cell-related statistics on a line.
The dsplncnt command displays counters for the following:
•
•
•
•
•
•
•
•
•
An asterisk (*) indicates the displayed field does not apply to the AXSM-1-2488.
Note Some counters apply to both the ingress direction and the egress direction. Some apply to only the
ingress direction. See the example output.
Cards on Which This Command Runs
AXSM
AXSM Syntax
dsplncnt <bay.line>
Syntax Description
<intvl>
<bay>
<line>
Related Commands
clrlncnt
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
CLP0 and CLP1 cells*
Valid and errored OAM cells
Invalid VPI/VCI/PTI cells*
Last unknown VPI/VCI*
Non-zero generic flow control (GFC) cells*
Discarded or corrected HEC errors
Discarded usage parameter control (UPC) cells with CLP0*
Total UPC cells*
Total non-compliant UPC cells*
The time interval to display (0–96). 0 is the current 15-minute interval. 1 is the most
recent 15-minute interval. 2 is the next most recent 15-minute interval, and so on.
96 being the oldest 15-minute interval.
Bay number: 1 or 2
Line number:
• For OC12: 1
For OC3: 1–4
•
• T3, E3: 1–8
Cisco MGX 8850 Routing Switch Command Reference
dsplncnt
9-113