Delpnport - Cisco MGX 8850 Command Reference Manual

Chapter 6 Logical Node, Port, and Signaling Commands

delpnport

Delete Port
Remove a UNI or NNI port from the controller. It is allowed only if the PNNI port does not exist on the
switch i.e, the PNNI partition associated with the port is removed. If the controller does no provisioning
on the port in the Plug and Play Scenario, then the PNNI port on the controller is removed if you remove
the PNNI Partition on the switch.
Cards on Which This Command Runs
PXM45
Syntax
delpnport <portid>
Syntax Description
portid
Related Commands
addpnport, uppnport, dnpnport, dsppnport
Attributes
Log: log
Example
Delete port 11:2.8:28 from the switch.
Geneva.7.PXM.a > delpnport 11:2.8:28
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
The portid is the PNNI physical port. The format is [shelf.]slot[:subslot].port[:subport].
See also PNNI Format, page
State: active
6-4.
Privilege: GROUP1
Cisco MGX 8850 Routing Switch Command Reference
delpnport
6-59