Cnfe164Justify - Cisco MGX 8850 Command Reference Manual

Chapter 6 Logical Node, Port, and Signaling Commands

cnfe164justify

Configure E.164 Justification
Specifies whether the E.164 AESAs with the E.164 AFI are converted to the left or right-justified
encoding format. For PNNI to search the address correctly, all nodes in the PNNI network must use the
same justification.
Cards on Which This Command Runs
PXM45
Syntax
cnfe164justify left | right
Syntax Description
left or
right
Related Commands
dspsvcparm
Attributes
Log: log
Examples
Configure right-hand justification for the E.164 AESAs.
Geneva.7.PXM.a > cnfe164justify right
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
Justification of E164 addresses. Type the entire word "left" or "right." The
default is left.
State: active Privilege: SUPER_GP
Cisco MGX 8850 Routing Switch Command Reference
cnfe164justify
6-21