Delfdr - Cisco MGX 8850 Command Reference Manual

delfdr

delfdr
Delete Feeder
Deletes a feeder node connection from the specified port (ifNum). The interface numbers of active ports
are displayed in the dspports command report.
Note You cannot delete a port that has feeder node connections on it.
For more detailed information on configuring a feeder, see the Cisco MGX 8850 Switch Software
Configuration Guide, Release 2.
Syntax
delfdr <ifNum>
Syntax Description
ifNum
Card(s) on Which This Command Executes
AXSM
Related Commands
addfdr, dspfdr, dspfdrs
Attributes
Log: log
Example
delfdr 8
Cisco MGX 8850 Routing Switch Command Reference
3-40
The interface number of the port from which the feeder node connection will be deleted.
The interface numbers of active ports are displayed in the dspports command output.
State: active
Chapter 3 Equipment and Resource Provisioning
Privilege: GROUP1
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001