Dspcdsct - Cisco MGX 8850 Command Reference Manual

Chapter 3 Equipment and Resource Provisioning

dspcdsct

Display Card SCT
Displays the contents of a card-level service class template (SCT) file. For information about SCTs, see
the cnfcdsct description. To see the number of the current SCT for the card, use dspcd. The examples in
this description illustrate the contents of SCT number 2 and SCT 3.
Note
Cards on Which This Command Runs
AXSM
Syntax
dspcdsct <parameter_group> [|bw|gen|cosb|vcThr|cosThr ]
Syntax Description
parameter_group can be:
•
•
•
•
•
Related Commands
cnfcdsct, dspsct
Attributes
Log: no log
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
Currently, the system does not support certain parameters in the service class templates
(SCTs), so you can specify them through addcon, cnfcon, or Cisco WAN Manager.
These parameters are (when applicable) PCR, SCR, and ICR.
bw for bandwidth
gen for policing and CAC
cosb for Class of Service Buffer specifications
vcThr for VC thresholds
cosThr for COSB thresholds
State: active, standby Privilege: ANYUSER
Cisco MGX 8850 Routing Switch Command Reference
dspcdsct
3-59