Upcon - Cisco MGX 8850 Command Reference Manual

upcon

upcon
Up Connection—bring a connection back into service.
Activate a connection that was previously downed by the dncon command. The typical use of dncon is
some form of operational modification or troubleshooting.
Cards on Which This Command Runs
AXSM
Syntax
upcon <ifNum > <vpi> <vci>
Syntax Description
ifNum
vpi
vci
Related Commands
dncon
Attributes
Log: log
Cisco MGX 8850 Routing Switch Command Reference
7-56
The logical port number. The range for AXSM is 1–60.
Virtual path identifier. On the AXSM, the range is 0–255.
Virtual connection identifier. On t he AXSM, the range is 32–65535 for a VCC. For
a VPC, the only vci is 0.
State: active
Chapter 7
Privilege: GROUP1
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
SPVC and SVC Commands