Delpnportacc - Cisco MGX 8850 Command Reference Manual

delpnportacc

delpnportacc
Delete Port Access
Removes an address access filter group from a port.
Cards on Which This Command Runs
PXM45
Syntax
delpnportacc <portid>
{in | out}
Syntax Description
portid
in
out
Related Commands
cnfpnportacc
Attributes
Log: log
Example
Delete the filter group for incoming calls from port 11:2.8:28.
Geneva.7.PXM.a > delpnportacc 11:2.8:28 in
Cisco MGX 8850 Routing Switch Command Reference
6-60
The portid is the PNNI physical port. The format is
[shelf.]slot[:subslot].port[:subport]. See also
Delete incoming access group for the port.
Delete outgoing access group for the port.
State: active
Chapter 6
PNNI Format, page
Privilege: GROUP1
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
Logical Node, Port, and Signaling Commands
6-4.