Dspspvcprfx - Cisco MGX 8850 Command Reference Manual

dspspvcprfx

dspspvcprfx
Display SPVC Prefix
The dspspvcprfx command displays the prefix for the switch-level SPVC address. The switch comes
with a default SPVC prefix, and you can modify the prefix by executing cnfspvcprfx. See description
of cnfspvcprfx for more details.
Cards on Which This Command Runs
PXM45
Syntax
dspspvcprfx
Syntax Description
This command takes no parameters.
Related Commands
cnfspvcprfx, dspspvcaddr
Attributes
Log: nolog
Example
MGX8850.7.PXM.a > dspspvcprfx
SPVC Node Prefix: 47.00918100000100001a531c2a
Cisco MGX 8850 Routing Switch Command Reference
6-110
State: active, standby Privilege: ANYUSER
Chapter 6 Logical Node, Port, and Signaling Commands
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001