Cisco MGX 8850 Command Reference Manual page 24

Organization
Organization
The chapters in this guide are:
Chapter 1
Chapter 2
Chapter 3
Chapter 4
Chapter 5
Chapter 6
Chapter 7
Chapter 8
Chapter 9
Index
Cisco MGX 8850 Routing Switch Command Reference
xxii
Command Line Interface Overview
Describes the how to use the command line interface CLI and includes descriptions of
user-oriented commands.
Shelf Management Commands
Describes commands that pertain primarily to switch-level configuration.
Equipment and Resource Provisioning
Describes commands for specifying physical characteristics to the node and logical
resources to the controllers.
ILMI Commands
Describes commands that add, modify, display status, and create statistics for ILMI.
PNNI Commands
Describes commands to add, delete, configure, display status, and create statistics for
the PNNI routing protocol.
Logical Node, Port, and Signaling Commands
Describes commands to specify node-level and PNNI logical port parameters.
SPVC and SVC Commands
Describes commands to add, delete, configure, display, and specify statistics for SPVCs.
Network Optimization Commands
Describes commands to optimize PNNI routing.
Troubleshooting Commands
Describes commands that help you troubleshoot the node and the network.
Index
Lists the name and chapter and page number for every command in the manual.
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001