Cisco MGX 8850 Command Reference Manual page 347

Chapter 5 PNNI Commands
dsppnni-bn-path
Display PNNI Border Node Paths
This debugging command displays the border node-to-border node paths of the immediate
child-peer-group of the logical group nodes (LGN).
Note The command applies to multi-peer groups only.
Cards on Which This Command Runs
PXM45
Syntax
dsppnni-bn-path <node-index>
Syntax Description
node-index
Contents of the dsppnni-bn-path Output
node index
source node IDB index
source node ID
destination node IDB index
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
— display the PNNI border node paths.
The node index indicates the relative level of the logical node within the hierarchy on
the switch. The range is 1–10, and the lowest level is 1.
Range: 1–10
Default: none
The range is 1–10.
The node identifier within the internal data base (IDB).
Range: 1–2147483648
The node ID of the source.
The node ID of each destination node.
Cisco MGX 8850 Routing Switch Command Reference
dsppnni-bn-path
5-53