Clrilmicnt - Cisco MGX 8850 Command Reference Manual

Chapter 9 Troubleshooting Commands

clrilmicnt

Clear ILMI Counters
Clears the ILMI statistics for a partition and logical port on a service module.
Cards on Which This Command Runs
AXSM
Syntax
clrilmicnt <ifNum> <partId>
Syntax Description
ifNum
partId
Related Commands
dspilmicnt, dspilmi, dspilmis
Attributes
Log: no log
Example
Clear the ILMI statistics for logical interface 1, resource partition 1. Before doing so, confirm the
existence of these entities by executing dspparts.
pop20two.1.AXSM.a > dspparts
if
Num ID
-----------------------------------------------------------------------------
1
pop20two.1.AXSM.a > clrilmicnt 1 1
ilmi stats for ifNum 1, partId 1 cleared
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
The logical port number. The range for AXSM is 1–60.
Number of the partition in the range 1–20.
State: active
part Ctlr egr egr
ID GuarBw MaxBw
(.0001%)(.0001%)(.0001%)(.0001%)
1 2 10000 10000
Privilege: SUPER_GP
ingr ingr min max
GuarBw MaxBw vpi vpi
10000 10000 10 100
Cisco MGX 8850 Routing Switch Command Reference
min max min max
vci vci conn conn
100 1000 0 10
clrilmicnt
9-19