Switchcc - Cisco MGX 8850 Command Reference Manual

Chapter 2 Shelf Management Commands

switchcc

Switch Core Cards
Switch control of the MGX 8850 node from the present slot to the other PXM45 slot. If a standby
PXM45 is not available, the node blocks the switchcc command.
You cannot execute switchcc during a configuration-copy. If you attempt it, the system displays the
message "Core card redundancy unavailable."
Cards on Which This Command Runs
PXM45
Syntax
switchcc
Related Commands
None
Attributes
Log: no log
Example
Attempt a switchcc without a standby PXM45.
raviraj.7.PXM.a >
Do you want to proceed (Yes/No)? y
Core card redundancy unavailable
raviraj.7.PXM.a >
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
State: active
switchcc
Privilege: SERVICE_GP
Cisco MGX 8850 Routing Switch Command Reference
switchcc
2-97