Cisco MGX 8850 Command Reference Manual page 147

Chapter 2 Shelf Management Commands
saveallcnf
Example
Save the system configuration. Note that the system displays the name of the saved configuration file.
MGX8850.7.PXM.a > saveallcnf
The 'saveallcnf' command can be time-consuming. The shelf
must not provision new circuits while this command is running.
Do not run this command unless the shelf configuration is stable
or you risk corrupting the saved configuration file.
saveallcnf: Do you want to proceed (Yes/No)? n
(command not executed)
Cisco MGX 8850 Routing Switch Command Reference
2-89
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001