Ip Ssh Connection-Rate-Limit - Dell S6100 Configuration Manual

Version
9.11(0.0)
Usage Information
If both the challenge response authentication and password authentication methods are configured, the challenge
response authentication takes priority.
SSHv1 does not support challenge response authentication.

ip ssh connection-rate-limit

Configure the maximum number of incoming SSH connections per minute.
Syntax ip ssh connection-rate-limit 1-60
Parameters
1-60
Defaults 10 per minute
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version
9.11(0.0)
9.10(0.0)
9.8(1.0)
9.8(0.0P5)
9.8(0.0P2)
9.7(0.0)
9.2(1.0)
9.0.2.0
8.3.19.0
8.3.11.1
8.3.7.0
7.6.1.0
7.5.1.0
pre-6.1.1.0
Description
Introduced on the S4810, S4820T, S3048–ON, S3100 Series, S4048–ON, S5000, S6000,
S6000–ON, Z9500, Z9100–ON, S6100–ON, S6010–ON, S4048T–ON, C9000, and MXL.
NOTE:
Enter the number of maximum numbers of incoming SSH connections allowed per
minute. The range is from 1 to 60 per minute. The default is 10 per minute.
Description
Increased the SSH rate–limit range.
Introduced on the S6100-ON.
Introduced on the Z9100-ON.
Introduced on the S4048-ON.
Introduced on the S3048-ON.
Introduced on the S6000–ON.
Introduced on the Z9500.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
Security 1441