:SAVE:WAVeform:FORMat
Command Syntax
:SAVE:WAVeform:FORMat <format>
<format> ::= {ALB | ASCiixy | CSV | BINary}
The :SAVE:WAVeform:FORMat command sets the waveform data format
type:
• ALB — creates an Agilent module binary format file. These files can be
• ASCiixy — creates comma- separated value files for each analog channel
• CSV — creates one comma- separated value file that contains
• BINary — creates an oscilloscope binary data format file. See the User's
Query Syntax
:SAVE:WAVeform:FORMat?
The :SAVE:WAVeform:FORMat? query returns the selected waveform data
format type.
Return Format
<format><NL>
<format> ::= {ALB | ASC | CSV | BIN | NONE}
When NONE is returned, it indicates that an image file format is currently
selected.
See Also
•
•
•
•
Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide
(see
page
1088)
viewed offline by the Agilent Logic Analyzer application software. The
proper file extension for this format is ".alb".
that is displayed (turned on). The proper file extension for this format
is ".csv".
information for all analog channels that are displayed (turned on). The
proper file extension for this format is ".csv".
Guide for a description of this format. The proper file extension for this
format is ".bin".
"Introduction to :SAVE Commands"
":SAVE:WAVeform[:STARt]"
":SAVE:WAVeform:LENGth"
":SAVE:IMAGe:FORMat"
on page 575
on page 588
on page 590
on page 580
25
:SAVE Commands
589