Recall:wmemory<R>[:Start] - Agilent Technologies InfiniiVision 2000 X-Series Programmer's Manual

:RECall:WMEMory<r>[:STARt]
Command Syntax
:RECall:WMEMory<r>[:STARt] [<file_name>]
<r> ::= 1-2 in NR1 format
<file_name> ::= quoted ASCII string
The :RECall:WMEMory<r>[:STARt] command recalls a reference waveform.
If a file extension is provided as part of a specified <file_name>, it must be ".h5".
N O T E
See Also
•
•
•
Agilent InfiniiVision 2000 X-Series Oscilloscopes Programmer's Guide
(see page 790)
"Introduction to :RECall Commands"
":RECall:FILename" on page 419
":SAVE:WMEMory[:STARt]"
on page 417
on page 445
23
:RECall Commands
423