Agilent Technologies InfiniiVision 4000 X-Series Programmer's Manual page 126

4
Commands Quick Reference
Table 32 :SBUS<n>:UART Commands Summary (continued)
Command
:SBUS<n>:UART:BITorde
r <bitorder> (see
page 775)
n/a
:SBUS<n>:UART:COUNt:R
ESet (see page 777)
n/a
n/a
:SBUS<n>:UART:FRAMing
<value> (see
page 780)
:SBUS<n>:UART:PARity
<parity> (see
page 781)
:SBUS<n>:UART:POLarit
y <polarity> (see
page 782)
:SBUS<n>:UART:SOURce:
RX <source> (see
page 783)
126
Query
:SBUS<n>:UART:BITorde
r? (see page 775)
:SBUS<n>:UART:COUNt:E
RRor? (see page 776)
n/a
:SBUS<n>:UART:COUNt:R
XFRames? (see
page 778)
:SBUS<n>:UART:COUNt:T
XFRames? (see
page 779)
:SBUS<n>:UART:FRAMing
? (see page 780)
:SBUS<n>:UART:PARity?
(see page 781)
:SBUS<n>:UART:POLarit
y? (see page 782)
:SBUS<n>:UART:SOURce:
RX? (see page 783)
Agilent InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
Options and Query Returns
<bitorder> ::= {LSBFirst |
MSBFirst}
<frame_count> ::= integer in NR1
format
n/a
<frame_count> ::= integer in NR1
format
<frame_count> ::= integer in NR1
format
<value> ::= {OFF | <decimal> |
<nondecimal>}
<decimal> ::= 8-bit integer from
0-255 (0x00-0xff)
<nondecimal> ::= #Hnn where n ::=
{0,..,9 | A,..,F} for hexadecimal
<nondecimal> ::= #Bnn...n where n
::= {0 | 1} for binary
<parity> ::= {EVEN | ODD | NONE}
<polarity> ::= {HIGH | LOW}
<source> ::= {CHANnel<n> |
EXTernal} for DSO models
<source> ::= {CHANnel<n> |
DIGital<d>} for MSO models
<n> ::= 1 to (# analog channels)
in NR1 format
<d> ::= 0 to (# digital channels
- 1) in NR1 format