Crankcase Breather System; Exploded View - Crankcase Breather System - Seat Ateca 2017 Workshop Manual

4 cyl. petrol engine (1.8 l and 2.0 l with direct injection, 4 V, exhaust gas turbocharger, timing chain,
3

Crankcase breather system

⇒ "3.1 Exploded view - crankcase breather system", page 219
⇒ "3.2 Removing and installing the oil separator", page 220
3.1

Exploded view - crankcase breather system

1 - Rocker finger cover
2 - Gasket
❑ Renew
3 - Hose
❑ to activated charcoal fil‐
ter solenoid valve 1 -
N80-
4 - Oil separator
❑ Removing and fitting
⇒ page 220
5 - Seal
❑ Renew
6 - Hose
❑ for crankcase breather
❑ to exhaust gas turbo‐
charger
7 - Bolt
❑ Thread-forming
❑ Fit and screw in bolt by
hand so that it is
screwed into old thread.
Then tighten bolt to tor‐
que.
❑ 4 Nm
8 - Seal
❑ Renew
9 - Bolt
❑ Thread-forming
❑ Fit and screw in bolt by
hand so that it is
screwed into old thread.
Then tighten bolt to torque.
❑ Tightening torque and sequence
Ateca 2017 ➤ , León 2013 ➤ , León ST 2013 ➤
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by SEAT S.A. SEAT S.A does not guarantee or accept any liability with
respect to the correctness of information in this document. Copyright by SEAT S.A.
⇒ page 220
EA 888 III. Gen) - Edition 10.2018
3. Crankcase breather system
219