Seat Ateca 2017 Workshop Manual page 272

Ateca 2017 ➤ , León 2013 ➤ , León ST 2013 ➤
4 cyl. petrol engine (1.8 l and 2.0 l with direct injection, 4 V, exhaust gas turbocharger, timing chain,
EA 888 III. Gen) - Edition 10.2018
Note
Use the extraction adapter
– Detach suction hose -5- from container -2-.
– Fit extraction adapter -12- onto plug-in connector of suction
hose -5-.
– Switch on pump -7-, and open shut-off taps -A- and -B- on
valve block -8-.
– Use extraction adapter -12- to extract any excess coolant.
– Close shut-off taps on valve block, and switch off pump.
Cleaning coolant flushing and filling device - VAS 531 007- :
264
Rep. gr.19 - Cooling
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by SEAT S.A. SEAT S.A does not guarantee or accept any liability with
respect to the correctness of information in this document. Copyright by SEAT S.A.
⇒ Item 14 (page 249) (14) for extracting the coolant.