Seat Ateca 2017 Workshop Manual page 132

Ateca 2017 ➤ , León 2013 ➤ , León ST 2013 ➤
4 cyl. petrol engine (1.8 l and 2.0 l with direct injection, 4 V, exhaust gas turbocharger, timing chain,
EA 888 III. Gen) - Edition 10.2018
Removing
– Remove wheel housing liner (front right) ⇒ General body re‐
pairs, exterior; Rep. gr. 66 ; Wheel housing liners; Exploded
view - wheel housing liner (front) .
– Remove engine support
– Remove vibration damper
– Drain engine oil ⇒ Maintenance ; Booklet 501 ; Engine oil:
Draining; Renewing oil filter and replenishing engine oil .
– Remove valve for oil pressure control - N428-
– Remove tensioner for poly V-belt
– Move retaining clip -2- for electrical wiring harness clear.
– Unscrew bolt -1-.
– Unclip guide tube from timing chain cover (top) in direction of
-arrow-.
– Pull guide tube for oil dipstick out of timing chain cover.
Cover with 8 bolts
– Unscrew bolts -1 ... 8-.
– Lever lower timing chain cover off.
124
Rep. gr.15 - Cylinder head, valve gear
⇒ page 69 .
⇒ page 61 .
⇒ page 231
⇒ page 61 .
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by SEAT S.A. SEAT S.A does not guarantee or accept any liability with
.
respect to the correctness of information in this document. Copyright by SEAT S.A.