Seat Ateca 2017 Workshop Manual page 347

Ateca 2017 ➤ , León 2013 ➤ , León ST 2013 ➤
4 cyl. petrol engine (1.8 l and 2.0 l with direct injection, 4 V, exhaust gas turbocharger, timing chain,
EA 888 III. Gen) - Edition 10.2018
High-pressure pump and Hall sender
1 - Hall sender 3 - G300-
2 - Fuel metering valve - N290-
3 - Fuel supply line to fuel rail of intake manifold injectors, MPI
4 - Fuel supply line to fuel rail of direct injection injectors, FSI
5 - Fuel supply pipe from fuel tank
Flechas - -Arrows- denote securing bolts
Engine speed sender - G28- -1-
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by SEAT S.A. SEAT S.A does not guarantee or accept any liability with
respect to the correctness of information in this document. Copyright by SEAT S.A.
Valves for camshaft adjustment
1 - Electrical connector for exhaust camshaft control valve 1 -
N318-
2 - Exhaust camshaft control valve 1 - N318-
3 - Electrical connector for camshaft control valve 1 - N205-
4 - Valve 1 for variable distribution - N205-
Coolant temperature sensor - G62-
1 - Electrical connector for coolant temperature sender - G62-
2 - Bolt
3 - Coolant temperature sensor - G62-
339
1. Injection system