Seat Ateca 2017 Workshop Manual page 338

Ateca 2017 ➤ , León 2013 ➤ , León ST 2013 ➤
4 cyl. petrol engine (1.8 l and 2.0 l with direct injection, 4 V, exhaust gas turbocharger, timing chain,
EA 888 III. Gen) - Edition 10.2018
– Lay aside wiring harness -1- and -2-.
– Remove bolt -3-.
– For reasons of space, remove the air filter housing together
with the intake hose
– Move clear wiring harnesses -1- at air intake pipe.
– Unfasten screw-type clip -2-.
– Remove bolt -3-.
– Remove air intake pipe -4- upwards.
Fitting
– Install in reverse order of removal, observing the following:
Specified torques ⇒ page 319
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by SEAT S.A. SEAT S.A does not guarantee or accept any liability with
respect to the correctness of information in this document. Copyright by SEAT S.A.
330
Rep. gr.21 - Turbocharging/supercharging
⇒ page 356 .