Seat Ateca 2017 Workshop Manual page 165

4 cyl. petrol engine (1.8 l and 2.0 l with direct injection, 4 V, exhaust gas turbocharger, timing chain,
4 - Bolt
❑ 5 Nm
5 - Ball stud
❑ For engine cover panel
❑ 9 Nm
6 - O-ring
❑ Renew
❑ Lubricate lightly with engine oil
7 - Sealing cap
8 - O-ring
❑ Renew
❑ Lubricate lightly with engine oil
9 - Hall sender 3 - G300-
❑ Exploded view ⇒ page 451
10 - Bolt
❑ Tightening torque
11 - Oil separator
❑ Removing and fitting
12 - Bolt
❑ Tightening torque and sequence
13 - Gasket
❑ Renew if damaged
14 - Vacuum pump
❑ Removing and fitting
15 - Bolt
❑ Renew Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by SEAT S.A. SEAT S.A does not guarantee or accept any liability with
❑ 8 Nm + 180°
respect to the correctness of information in this document. Copyright by SEAT S.A.
16 - Gasket
❑ Renew after removing
17 - O-ring
❑ Renew
❑ Lubricate lightly with engine oil
18 - Hall sensor - G40-
❑ Exploded view ⇒ page 451
19 - Bolt
❑ Tightening torque
20 - Bolt
❑ 9 Nm
21 - Support plate
❑ For activated charcoal filter solenoid valve 1 - N80-
⇒ page 451
⇒ page 220
⇒ page 220
⇒ page 115
⇒ page 451
Ateca 2017 ➤ , León 2013 ➤ , León ST 2013 ➤
EA 888 III. Gen) - Edition 10.2018
157
4. Valve gear