Seat Ateca 2017 Workshop Manual page 365

4 cyl. petrol engine (1.8 l and 2.0 l with direct injection, 4 V, exhaust gas turbocharger, timing chain,
– Pull out air filter housing -3- in -direction of arrow-. For it, re‐
move the air supply hood -2- from the top element in air supply
-1-.
Fitting
Note
Use a silicone-free lubricant when installing the air hose.
♦
Secure all hose connections with the correct type of hose clips
♦
(same as original equipment) ⇒ Electronic parts catalogue
(ETKA) .
– Check for salt residue, dirt and leaves in air intake hose (en‐
gine intake side).
– Check that there is no dirt between the air duct and the air filter
element.
– Re-install air cleaner housing.
Note
The water drain hose must be routed straight downwards without
kinks.
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by SEAT S.A. SEAT S.A does not guarantee or accept any liability with
respect to the correctness of information in this document. Copyright by SEAT S.A.
Ateca 2017 ➤ , León 2013 ➤ , León ST 2013 ➤
EA 888 III. Gen) - Edition 10.2018
357
3. Air cleaner