Seat Ateca 2017 Workshop Manual page 144

Ateca 2017 ➤ , León 2013 ➤ , León ST 2013 ➤
4 cyl. petrol engine (1.8 l and 2.0 l with direct injection, 4 V, exhaust gas turbocharger, timing chain,
EA 888 III. Gen) - Edition 10.2018
♦ Cable support bracket - T10355-
♦ Assembly tool - T10531-
Components of assembly tool - T10531- :
♦ Retainer - T10531/1-
♦ Cotter pin - T10531/2-
♦ Turning over tool - T10531/3-
♦ Flange nut - T10531/4-
Removing
– Remove noise insulation ⇒ General body repairs, exterior;
Rep. gr. 66 ; Noise insulation; Assembly overview - noise in‐
sulation .
– Remove front part of right wheel housing liner ⇒ General body
repairs, exterior; Rep. gr. 66 ; Wheel housing liners; Removing
and installing front wheel housing liner .
– Removing engine mounting
– Remove engine support
– Remove the upper cover of the distribution chain
⇒ page 121 .
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by SEAT S.A. SEAT S.A does not guarantee or accept any liability with
respect to the correctness of information in this document. Copyright by SEAT S.A.
136
Rep. gr.15 - Cylinder head, valve gear
⇒ page 51 .
⇒ page 69 .