Removing And Installing Camshaft Control Valve 1 N205 - Seat Ateca 2017 Workshop Manual

Ateca 2017 ➤ , León 2013 ➤ , León ST 2013 ➤
4 cyl. petrol engine (1.8 l and 2.0 l with direct injection, 4 V, exhaust gas turbocharger, timing chain,
EA 888 III. Gen) - Edition 10.2018
♦ Spacers - T40191-
Fitting
CAUTION
The ball for the sliding piece may pop out! Risk of eye injury!
– Wear safety goggles.
– Place spring -1- in the camshaft.
– Place ball -2- onto the spring in the camshaft.
– Push down ball and spring with spacers - T40191/1- in
-the direction of arrow A- and hold.
– Push forked sleeve -3- in -direction of arrow B-.
4.4 Removing and installing camshaft con‐
trol valve 1 - N205-
The description of work refers to camshaft control valve 1 - N205-
and to camshaft control valve 1 in the exhaust - N318- .
186
Rep. gr.15 - Cylinder head, valve gear
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by SEAT S.A. SEAT S.A does not guarantee or accept any liability with
respect to the correctness of information in this document. Copyright by SEAT S.A.