Seat Ateca 2017 Workshop Manual page 294

Ateca 2017 ➤ , León 2013 ➤ , León ST 2013 ➤
4 cyl. petrol engine (1.8 l and 2.0 l with direct injection, 4 V, exhaust gas turbocharger, timing chain,
EA 888 III. Gen) - Edition 10.2018
– Disconnect connector -4-, and pull out retaining clip -3-.
– Pull out radiator outlet coolant temperature sender - G83- -1-
with O-ring -2-.
Note
Place a cloth underneath to catch escaping coolant.
♦
Insert new coolant temperature sender - G83- immediately in‐
♦
to screw connection at radiator outlet to avoid loss of coolant.
Fitting
Install in the reverse order of removal, observing the following:
Note
Renew O-ring.
permitted unless authorised by SEAT S.A. SEAT S.A does not guarantee or accept any liability with
– Check coolant level
Specified torques
♦ Assembly overview - noise insulation ⇒ General body repairs,
exterior; Rep. gr. 66 ; Noise insulation; Assembly overview -
noise insulation .
286
Rep. gr.19 - Cooling
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
respect to the correctness of information in this document. Copyright by SEAT S.A.
⇒ page 240 .