Seat Ateca 2017 Workshop Manual page 188

Ateca 2017 ➤ , León 2013 ➤ , León ST 2013 ➤
4 cyl. petrol engine (1.8 l and 2.0 l with direct injection, 4 V, exhaust gas turbocharger, timing chain,
EA 888 III. Gen) - Edition 10.2018
– Turn inlet camshaft in direction of -arrow 1- using assembly
tool and adapter - T40266- , remove camshaft clamp -
T40271/2- from between splines of chain sprocket in direction
of -arrow 2- and bring camshaft into rest position.
– Turn outlet camshaft in direction of -arrow 1- using assembly
tool and adapter - T40266- , remove camshaft clamp -
T40271/1- from between splines of chain sprocket in direction
of -arrow 2- and bring camshaft into rest position.
– Remove high-pressure pump
– Remove vacuum pump
– Remove cylinder head cover bolts in the sequence -1 ... 6-.
permitted unless authorised by SEAT S.A. SEAT S.A does not guarantee or accept any liability with
180
Rep. gr.15 - Cylinder head, valve gear
⇒ page 381 .
⇒ page 115 .
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
respect to the correctness of information in this document. Copyright by SEAT S.A.