Seat Ateca 2017 Workshop Manual page 214

Ateca 2017 ➤ , León 2013 ➤ , León ST 2013 ➤
4 cyl. petrol engine (1.8 l and 2.0 l with direct injection, 4 V, exhaust gas turbocharger, timing chain,
EA 888 III. Gen) - Edition 10.2018
♦ Commercially availa‐
ble scraper.
♦ Electric drill with plas‐
tic brush
♦ Protective glasses
♦ Silicone sealant ⇒
Electronic Parts
Catalogue (ETKA) .
Components of the sep‐
arating tool - T10561-
1 - Bolt
2 - Flat washer
3 - Support plate
4 - Blade
5 - Guide piece
6 - Grip
7 - Inserts for support
(rod) for conver‐
sion of handle
8 - Bolt
9 - Measuring tool
Removing
– Remove noise insula‐
tion ⇒ General body
repairs, exterior; Rep.
gr. 66 ; Noise insula‐
tion; Assembly over‐
view - noise insula‐
tion .
– Place used oil collec‐
tion and extraction
unit - VAS 6622A- un‐
der engine and drain
engine oil.
– Unscrew all but 2 fixing screws of the oil sump.
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
– Loosen 2 bolts on oil sump, but do not unscrew completely.
permitted unless authorised by SEAT S.A. SEAT S.A does not guarantee or accept any liability with
206
Rep. gr.17 - Lubrication
respect to the correctness of information in this document. Copyright by SEAT S.A.