Coolant Pump/Thermostat Assembly; Exploded View - Coolant Pump And Thermostat - Seat Ateca 2017 Workshop Manual

Ateca 2017 ➤ , León 2013 ➤ , León ST 2013 ➤
4 cyl. petrol engine (1.8 l and 2.0 l with direct injection, 4 V, exhaust gas turbocharger, timing chain,
EA 888 III. Gen) - Edition 10.2018
2

Coolant pump/thermostat assembly

⇒ "2.1 Exploded view - coolant pump and thermostat",
page 268
⇒ "2.2 Exploded view - electric coolant pump", page 270
⇒ "2.3 Exploded view - coolant temperature sensors", page 273
⇒ "2.4 Removing and installing toothed belt for coolant pump",
page 273
⇒ "2.5 Removing and replacing coolant pump", page 276
⇒ "2.6 Removing and installing electric coolant pump",
page 277
⇒ "2.7 Removing and installing coolant shut-off valve N82 ", page
278
⇒ "2.8 Removing and installing coolant valve for gearbox N488 ,
vehicles with dual clutch gearbox", page 280
⇒ "2.9 Removing and installing actuator for engine temperature
regulation N493 ", page 282
⇒ "2.10 Removing and installing coolant temperature sender G62
", page 284
⇒ "2.11 Removing and installing coolant temperature sender at
radiator outlet G83 ", page 285
2.1

Exploded view - coolant pump and thermostat

Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by SEAT S.A. SEAT S.A does not guarantee or accept any liability with
respect to the correctness of information in this document. Copyright by SEAT S.A.
268
Rep. gr.19 - Cooling