Seat Ateca 2017 Workshop Manual page 174

Ateca 2017 ➤ , León 2013 ➤ , León ST 2013 ➤
4 cyl. petrol engine (1.8 l and 2.0 l with direct injection, 4 V, exhaust gas turbocharger, timing chain,
EA 888 III. Gen) - Edition 10.2018
– Fit inlet camshaft -A- in cylinder head. Turn cams for cylinder
4 -arrows- upwards.
– Check whether the plungers of the actuators for cam adjust‐
ment are retracted.
– Fit exhaust camshaft in cylinder head cover as shown in illus‐
tration. Push cam pairs -A and B- towards each other.
– Turn exhaust camshaft until markings -A- and -B- are properly
aligned.
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by SEAT S.A. SEAT S.A does not guarantee or accept any liability with
respect to the correctness of information in this document. Copyright by SEAT S.A.
166
Rep. gr.15 - Cylinder head, valve gear