Seat Ateca 2017 Workshop Manual page 245

4 cyl. petrol engine (1.8 l and 2.0 l with direct injection, 4 V, exhaust gas turbocharger, timing chain,
1.1.4 Vehicles with dual clutch gearbox and
auxiliary radiator on right and left sides
Note
Blue = large coolant circuit.
♦
Red = small coolant circuit.
♦
Brown = heater circuit.
♦
Yellow = gear oil cooling circuit.
♦
Arrows show direction of coolant flow.
♦
1 - Auxiliary radiator
❑ Location: in right rear
wheel housing
❑ General exploded view
⇒ page 292
❑ Removing and installing
⇒ page 292
2 - Coolant temperature send‐
er at the radiator outlet - G83-
❑ General exploded view
⇒ page 273
❑ Removing and installing
⇒ page 285
3 - Actuator for engine temper‐
ature regulation - N493-
4 - Cylinder head/cylinder
block
❑ Renew coolant after re‐
newing
❑ General exploded view
⇒ page 105
❑ Removing and installing
⇒ page 108
5 - Throttle
6 - Coolant expansion tank
7 - Filler cap for expansion tank
❑ Checking pressure re‐
lief valve ⇒ page 247
8 - Non-return valve
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
9 - Exhaust manifold
permitted unless authorised by SEAT S.A. SEAT S.A does not guarantee or accept any liability with
respect to the correctness of information in this document. Copyright by SEAT S.A.
10 - Turbocharger
❑ General exploded view
❑ Removing and installing
11 - Heat exchanger for heater
❑ Renew coolant after renewing
Ateca 2017 ➤ , León 2013 ➤ , León ST 2013 ➤
⇒ page 307
⇒ page 309
EA 888 III. Gen) - Edition 10.2018
1. Cooling system/coolant
237