Seat Ateca 2017 Workshop Manual page 309

4 cyl. petrol engine (1.8 l and 2.0 l with direct injection, 4 V, exhaust gas turbocharger, timing chain,
– Vehicles with auxiliary radiator: Unscrew bolts -arrows- and
remove the engine hose.
– Remove noise insulation ⇒ General body repairs, exterior;
Rep. gr. 66 ; Noise insulation; Assembly overview - noise in‐
sulation .
– Loosen hose clips -arrows-, and remove charge air hose -A-.
– Unplug electrical connector -1- for radiator fan (push retainer
in direction of -arrow A- and press release catch down).
– Press locking tabs on left and right of radiator cowl simultane‐
ously -arrow B-, and detach radiator cowl downwards.
– Cover radiator using protective mat - VAS 531 003- .
Installation
Installation is in the reverse sequence of removal.
Specified torques
♦ ⇒ General body repairs, exterior; Rep. gr. 66 ; Noise insula‐
tion; Assembly overview - noise insulation
Ateca 2017 ➤ , León 2013 ➤ , León ST 2013 ➤
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by SEAT S.A. SEAT S.A does not guarantee or accept any liability with
respect to the correctness of information in this document. Copyright by SEAT S.A.
EA 888 III. Gen) - Edition 10.2018
4. Radiator/radiator fans
301