4 cyl. petrol engine (1.8 l and 2.0 l with direct injection, 4 V, exhaust gas turbocharger, timing chain,
For vehicles with particulate filter
– Remove bolts -arrows- and nuts -1-.
– Disconnect electrical connector -arrow-from pressure differ‐
ential sender for particulate filter - G1037- .
– Unscrew the bolts -arrows- and place the pressure lines to‐
gether with the pressure differential sender for particulate filter
- G1037- to the rear.
Continued for all vehicles
– Remove bracket -2- for turbocharger from below. To do this,
unscrew bolt -1- and loosen bolt -3-.
Ateca 2017 ➤ , León 2013 ➤ , León ST 2013 ➤
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by SEAT S.A. SEAT S.A does not guarantee or accept any liability with
respect to the correctness of information in this document. Copyright by SEAT S.A.
EA 888 III. Gen) - Edition 10.2018
1. Turbocharger
313