Mixture Preparation - Injection; Injection System; Overview Of Fitting Locations - Injection System - Seat Ateca 2017 Workshop Manual

4 cyl. petrol engine (1.8 l and 2.0 l with direct injection, 4 V, exhaust gas turbocharger, timing chain,
24 –

Mixture preparation - injection

1

Injection system

⇒ "1.1 Overview of fitting locations - injection system",
page 331
1.1 Overview of fitting locations - injection
system
Components A to H are not shown in the exploded view.
1 - Valve 1 for variable distri‐
bution - N205-
❑ Location ⇒ page 339
❑ Removing and fitting
⇒ page 186
2 - Exhaust camshaft control
valve 1 - N318-
❑ Location ⇒ page 339
❑ Removing and fitting
⇒ page 153
3 - Lambda probe 1 after cata‐
lytic converter - GX7-
❑ comprising:
Lambda probes after the
catalytic converter -
G130-
Lambda probe heater 1
after catalytic converter -
Z29-
❑ Location ⇒ page 341
❑ Removing or installing
⇒ page 389
4 - Exhaust camshaft
❑ Exhaust cam actuator B
for cylinder 1 - N581-
❑ Exhaust cam actuator A
for cylinder 1 - N580-
❑ Exhaust cam actuator A
for cylinder 2 - N588-
❑ Exhaust cam actuator B
for cylinder 2 - N589-
❑ Exhaust cam actuator B
for cylinder 3 - N597-
❑ Exhaust cam actuator A for cylinder 3 - N596-
❑ Exhaust cam actuator A for cylinder 4 - N604-
❑ Exhaust cam actuator B for cylinder 4 - N605-
❑ Location ⇒ page 336
❑ Removing and fitting
5 - Lambda sensor 1 before catalytic converter - GX10-
❑ comprising:
Lambda sensor - G39-
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by SEAT S.A. SEAT S.A does not guarantee or accept any liability with
respect to the correctness of information in this document. Copyright by SEAT S.A.
⇒ page 153
Ateca 2017 ➤ , León 2013 ➤ , León ST 2013 ➤
EA 888 III. Gen) - Edition 10.2018
331
1. Injection system