Assembly Bracket; Installation Overview - Assembly Mountings; Protected By Copyright. Copying For Private Or Commercial Purposes, In Part Or In Whole, Is Not - Seat Ateca 2017 Workshop Manual

Ateca 2017 ➤ , León 2013 ➤ , León ST 2013 ➤
4 cyl. petrol engine (1.8 l and 2.0 l with direct injection, 4 V, exhaust gas turbocharger, timing chain,
EA 888 III. Gen) - Edition 10.2018
2

Assembly bracket

⇒ "2.1 Installation overview - assembly mountings", page 44
⇒ "2.2 Removing and installing engine mountings", page 45
⇒ "2.3 Removing and installing gearbox mounting", page 47
⇒ "2.4 Removing and installing pendulum support", page 50
⇒ "2.5 Supporting engine in installation position", page 51
⇒ "2.6 Adjusting assembly mounting", page 55
⇒ "2.7 Checking adjustment of assembly mountings", page 56
2.1

Installation overview - assembly mountings

1 - Bolt
❑ Renew
❑ Tightening torque and
sequence ⇒ page 70
2 - Engine support
❑ Removing and fitting
⇒ page 69
3 - Engine support.
❑ With support arm
❑ Removing and fitting
⇒ page 51

Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not

permitted unless authorised by SEAT S.A. SEAT S.A does not guarantee or accept any liability with
4 - Bolt
❑ Renew
❑ 40 Nm +90°
5 - Bolt
❑ Renew
❑ 20 Nm +90°
6 - Bolt
❑ Renew
❑ 40 Nm +90°
7 - Bolt
❑ Renew
❑ 60 Nm +90°
8 - Torque reaction support
❑ Removing and fitting
⇒ page 50
9 - Bolt
❑ Renew
❑ Tightening torque and
sequence ⇒ page 50
10 - Bolt
❑ Renew
❑ Tightening torque and sequence
11 - Bolt
❑ Renew
❑ Tightening torque and sequence
44
Rep. gr.10 - Removing and installing engine
respect to the correctness of information in this document. Copyright by SEAT S.A.
⇒ page 50
⇒ page 50