Seat Arona 2018 Owner's Manual
Hide thumbs Also See for Arona 2018:
Table of Contents

Advertisement

Owner's manual
SEAT Arona

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Arona 2018 and is the answer not in the manual?

Questions and answers

Summary of Contents for Seat Arona 2018

  • Page 1 Owner’s manual SEAT Arona...
  • Page 2 Vehicle Registration: On-board documentation Vehicle identification number: First key Second key Date of vehicle registration or vehicle delivery: Correct working order of all keys was checked SEAT Official Service: Location: Date: Signature of owner: Service advisor: Telephone:...
  • Page 3 Thank you for your trust choosing a SEAT ve- hicle. Read and always observe safety infor- mation concerning the passenger's With your new SEAT, you will be able to enjoy ››› front airbag page 81, Important in- a vehicle with state-of-the-art technology formation regarding the front passeng- and top quality features.
  • Page 4 ® About this manual Trademarks are marked with ®. The ab- CAUTION sence of this symbol does not guarantee Texts after this symbol indicate possible that the term is not a trademark. This manual describes the features of the ve- damage to the vehicle.
  • Page 5 Fig. 2 SEAT website Fig. 1 The operation of some of the vehicle's fea- tures can be shown as an instruction video: The digital version is available on SEAT's offi- cial website. ››› scan the QR code Fig. 2 ●...
  • Page 6 33 How do you remove the luggage compartment ››› page 259 ››› cover? page 158 How can the SEAT driving mode be adjusted? Emergency situations How do you drive in an economical and environ- ››› page 274 ››› mentally-friendly way? page 244 A warning lamp lights up or flashes.
  • Page 7: Table Of Contents

    Passenger-side general instrument pan- Seat belts ....... . . Keys ........
  • Page 8 Connectivity ......SEAT Drive Profile* ......
  • Page 9: The Essentials

    The essentials Exterior view ››› ››› page 16 page 58 ››› ››› page 46 page 17 ››› ››› page 15 page 52 ››› page 46...
  • Page 10: Exterior View

    The essentials Exterior view ››› ››› ››› page 47 page 46 page 30 ››› ››› ››› page 46 page 48 page 53 ››› ››› ››› page 49 page 48 page 52 ››› ›››  page 50 page 157...
  • Page 11: Driver-Side General Instrument Panel

    The essentials Driver-side general instrument panel (left-hand drive) ››› ››› ››› page 32 page 18  page 108 ››› ››› ››› page 38 page 17 page 31 ››› ››› ››› page 31 page 37 page 20 ››› ››› ››› page 20 page 33 page 50...
  • Page 12 The essentials Driver-side general instrument panel (right-hand drive) ››› ››› ››› page 33 page 18 page 38 ››› ››› ›››  page 108 page 31 page 20 ››› ››› ››› page 31 page 37 page 50 ››› ››› page 20 page 32...
  • Page 13: El (Left-Hand Drive)

    The essentials Passenger-side general instrument panel (left-hand drive) ››› page 21 ››› page 18 ›››  page 153...
  • Page 14: El (Right-Hand Drive)

    The essentials Passenger-side general instrument panel (right-hand drive) ››› page 21 ››› page 18 ››› page 17 ›››  page 153...
  • Page 15: Centre Console

    The essentials Centre console ››› ››› ››› ›››   page 32 page 220 page page 170 ››› ››› ››› page 40 page 15 page 41 The layout in right-hand drive vehicles is symmetrical.
  • Page 16: Interior View

    The essentials Interior view ››› ››› page 19 page 19 ››› ››› page 19 page 22 ›››  page 146 ››› page 27...
  • Page 17: How It Works

    The essentials How it works  ››› in Description on page 127 Opening and closing  ››› page 127 Related video Unlocking or locking of driver door Centre console: central locking buttons. Fig. 5 Opening and clos- Fig. 3 Locking and unlocking the vehicle using the key ›››...
  • Page 18 The essentials Insert the key shaft into the lower opening in Emergency locking of doors with- Rear lid ● ››› the cover on the driver door handle Fig. 6 out door cylinder (arrow) then remove the cover upwards. Insert the key blade into the lock cylinder to ●...
  • Page 19 The essentials Open the rear lid: exert slight pressure on There is a groove in the luggage compart- Bonnet ● ››› the handle Fig. 8. The rear lid opens auto- ment allowing access to the emergency matically. opening mechanism. Close the rear lid: hold it by one of the han- ●...
  • Page 20: Before Driving

    The essentials Open the door and pull the lever under the Controls for the windows ●  ››› in Opening and closing the ››› dashboard Fig. 11 electric windows on page 137 To lift the bonnet, press towards the left on ●...
  • Page 21 The essentials Manually adjusting the front seats Adjusting the head restraints Adjustment of the seat belt Front seat: adjusting the head restraint. Fig. 16 Fig. 15 Front seats: manual seat adjustment. To raise or lower the head restraint, press ●...
  • Page 22 The lap part of the seat belt lies across the pelvis, never across the stomach. The seat belt lies flat and fits comfortably on the pel- vis.
  • Page 23: Airbags

    ››› ››› tively Fig. 22 Fig. In conjunction with the seat belts, the front airbag system gives the driver and the front » passenger additional protection for the head...
  • Page 24 Open the door on the front passenger side. ● Insert the key into the slot of the switch for ● deactivating the front passenger airbag Side airbag in driver's seat. Fig. 26 ››› Fig. 24. About 3/4 of the key should enter;...
  • Page 25: Child Seats

    26. The locations are identified by the text “AIRBAG” in the upper region of the backrests. Child seats In conjunction with the seat belts, the side air- bag system provides additional protection for Related video the upper body in the event of a severe side collision.
  • Page 26 The essentials Important information regarding er's sun visor and/or on the passenger side door frame. the front passenger's airbag ››› in Important information re-  garding the front passenger's airbag on page 81  ››› page 80 Airbag adhesives - version 2: on the Fig.
  • Page 27 Figure is no contact with the child seat in the back in central rear seat as the ground clearance is ›››...
  • Page 28 Compliance with current national legislation and the manufacturer's instructions is required when using or installing child seats. For semi-universal chairs where the securing system is the car safety belt and the support bracket, do not use them in the centre rear seat.
  • Page 29 Two “ISOFIX” retaining rings are fitted on each The body weight permitted and information hind the seat backrest or in the boot) rear side seat. In some vehicles, the rings are regarding sizes A to F is indicated on the label ›››...
  • Page 30 IUF: Suitable for forward-facing ISOFIX universal child restraint systems approved for use in this mass group. IL: It is suitable for certain ISOFIX child restraint systems (CRS) that can be for the specific vehicle, restricted or semi-universal categories. Take the child seat manufacturer's vehicle list into account.
  • Page 31 Fig. 36 Fig. 35 You are obliged to follow the seat manufac- Press the child seat onto the “ISOFIX/iSize” Pull on both sides of the child seat to ensure ● ● turer's instructions. retaining rings until the child seat is heard to that it is properly anchored.
  • Page 32 ● facturer's instructions. Child seats with the Top Tether system come with a strap for securing the seat to the vehi- Releasing the retaining strap cle anchor point, located at the back of the Loosen the strap following the manufactur- ●...
  • Page 33: Starting The Vehicle

    The essentials Starting the vehicle Lights and visibility Turning on/switching off the ignition, glow plugs reheating Turn on the ignition: turn the key to the ● Ignition lock Related video position. Turn off the ignition: turn the key to the ●...
  • Page 34 The essentials Turn signal and main beam lever Hazard warning lights Sym- Ignition Ignition is switched off switched on Fog lights, dipped Light off or daytime  beam and side driving light on. lights off. The “Coming Automatic control of home”...
  • Page 35 The essentials Interior lights The light controls may vary depending on the More the lever to the required position: vehicle version. Windscreen wipers interval wipe. ››› Using the control Fig. 45 adjust   ››› page 144 the interval (vehicles without rain sen- sor), or the sensitivity of the rain sensor.
  • Page 36: Easy Connect

    The essentials Easy Connect menu settings Vehicle Easy Connect: Main menu. Easy Connect: CAR menu. Fig. 46 Fig. 47 The actual number of menus available and or, press the Infotainment button When the function button check box is activa-  ...
  • Page 37 The essentials Menu Submenu Possible setting Description ››› – Activation of the Electronic Stability Programme (ESC) page 226 ESC system ››› Tyre pressure storing (Calibration) page 329 Tyre monitor system Tyres Activation and deactivation of the speed warning. Setting the speed warning ›››...
  • Page 38 Time source, time, time zone, time format, date, date format – Date and time – Distance, speed, temperature, volume, fuel consumption, pressure – Units Chassis number, date of next SEAT service inspection, date of next oil change ››› – page 115 Service service Restore all settings –...
  • Page 39: Warning Lamps

    Fuel tank almost empty page 113. Engine cooling fluid page 114.  ››› Press the foot brake page 260. Fault in airbag system and seat belt ten-  ››› Engine oil pressure page 318.  ››› sioners page Yellow warning lamps ...
  • Page 40: Cruise Control

    The essentials Mobile telephone battery charge status Start-Stop system unavailable  ››› in Warning symbols on   ››› ››› page 209. page 248. page 118  ››› Low consumption driving status  Risk of freezing page 106.  ››› page 118 ›››...
  • Page 41 The essentials ››› Position of the turn signal lever Fig. 50  Function Effect ››› or the third lever Fig. 50  Switching on the cruise control Move controller to the position on the turn signal lever or move the third The system switches on.
  • Page 42: Gearbox Lever

    The essentials Selecting reverse gear Neutral (idling)  ››› in Cruise control operation on page 251 Drive (forward) Press the clutch pedal and keep your foot ● right down. +/– Tiptronic mode: pull the lever forwards  ››› page 250 (+) to go up a gear or backwards (–) to With the gearbox lever in neutral, push it ●...
  • Page 43: Air Conditioning

    The essentials under the console of the selector lever, on the Press the interlock button on the selector ● the vehicle could otherwise start to move right. Releasing the selector lever requires a lever and move the selector lever to posi- inadvertently after shifting the selector lev- certain degree of practical skill.
  • Page 44 The essentials How does Climatronic* work? In the centre console: Climatronic control Fig. 55 panel. To switch a specific function on, press the ap- The LED on each control lights up to indicate propriate button. Press the button again to that the respective function of a control has switch off the function.
  • Page 45 Heated rear window: this only works when the engine is running and switches off automatically after a maximum of 10 minutes.  Air recirculation   Seat heating buttons  Press the button to switch on or off the cooling system. Press the button to apply the driver-side settings to the passenger side.
  • Page 46 The essentials How does the manual air conditioning* and the heating and fresh air system work? In the centre console: controls for the manual air conditioning; heating and fresh air system controls. Fig. 56   To switch a specific function on, press the ap- The LED on each control lights up to indicate propriate button.
  • Page 47 Heated rear window: this only works when the engine is running and switches off automatically after a maximum of 10 minutes.  Manual air conditioning: Air recirculation  Manual air conditioning: Press the button to switch on or off the cooling system.   Manual air conditioning: Seat heating buttons  ››› in General notes on page 161  ›››...
  • Page 48: Fluid Level Control

    The essentials Fluid level control Fuel  ››› in Refuelling on page 309 Filling capacities  ››› page 308 Tank level Petrol and diesel 40 l, 7 l reserve engines Natural gas en- approx. 11.6 kg gine The capacity depends on the efficacy and charac- teristics of the natural gas pumps.
  • Page 49 Recommended by SEAT . It can never go above zone Set Service Zone : do not add oil. ● SEAT recommends using original SEAT oil to With particulate and Flexible VW 507 00 guarantee high SEAT engine performance. Zone : you can add oil but keep the level ●...
  • Page 50 To top up, mix water with a product recom- of distilled water and at least 40 % of the The brake fluid reservoir is located in the en- mended by SEAT. G13 or G12 plus-plus (TL-VW 774 G) additive ›››...
  • Page 51 The essentials ››› in Checking and topping up the  windscreen washer reservoir water on page 322  ››› page 322 Battery The battery is located in the engine compart- ››› ment  page 317. It does not require maintenance. It is checked as part of the In- spection Service.
  • Page 52: Emergencies

    The essentials Emergencies Opening and closing the fuse box situated Colour Amp rating below the dash panel Green Open: remove the fuse box cover in the di- ● Fuses ››› rection indicated Fig. Orange Close: click the cover back into place. ●...
  • Page 53: Bulbs

    The essentials Identifying a blown fuse Halogen headlights. Type Bulb light Left Right A fuse is blown if its metal strip is ruptured Main beam headlights Brake lights ››› Fig. 2 x P21WLL 2 x P21WLL Side light/DRL (daytime running Side lights W21W Point a lamp at the fuse to see if it has...
  • Page 54: Action In The Event Of A Puncture

    The essentials Action in the event of a punc- All occupants should leave the vehicle and Sealing the tyre ● wait in a safe place (for instance behind the Unscrew the tyre valve cap and insert. Use ● ture roadside crash barrier). ›››...
  • Page 55: Changing A Wheel

    The essentials Changing a wheel Keep the air compressor running until it rea- Jack* ● ches 2.0 to 2.5 bar (29-36 psi/200-250 kPa). Hook for extracting the central wheel A maximum of 8 minutes. trims* Related video Disconnect the air compressor. ●...
  • Page 56 Fitting Fit the central wheel trim onto the rim. The ● bottom of the “S” of the SEAT badge should ››› align with the inflation valve Fig. 70 Wheel: wheel bolts with caps.
  • Page 57 The essentials If the wheel bolt is very tight, carefully push Important information about wheel bolts on the end of the wheel wrench with your Factory-fitted rims and wheel bolts are spe- foot. Hold on to the vehicle for support and cially matched during construction.
  • Page 58 Other jacks, When fitting tyres with a compulsory rotation ened, they could come loose while driving even those approved for other SEAT mod- direction, observe the instructions in and cause an accident, serious injury and els could slip, with the consequent risk of ›››...
  • Page 59: Snow Chains

    The essentials Plate wheels: replace the wheel hubcap. If there is a danger of being trapped de- ● ● CAUTION spite having mounted the chains, it is best to Return all tools to their proper storing loca- ● When removing/fitting the wheel, the rim disable the driving wheels (ASR) in the ESC tion.
  • Page 60: Emergency Towing Of The Vehicle

    The essentials Emergency towing of the ve- Towline anchorages Driving style Attach the bar or rope to the towline ancho- Towing requires some experience, especially hicle rages. when using a tow rope. Both drivers should realise how difficult it is to tow a vehicle. Inex- The towline anchorages are located under Towing perienced drivers should not attempt to tow.
  • Page 61: How To Jump Start

    The essentials How to jump start Tow-starting How to jump start: description If the engine will not start, first try starting it Jump leads using the battery of another vehicle ››› page 59. You should only attempt to The jump lead must have a sufficient wire tow-start a vehicle if charging the battery cross section.
  • Page 62 The essentials Connect one end of the red jump lead to Start the engine of the vehicle with the ty (see imprint on battery). Failure to com- the positive terminal of the vehicle flat battery and wait for 2 or 3 minutes ply could result in an explosion.
  • Page 63: Changing The Windscreen Wiper Blades

    The essentials Extract the wiper blade from the wiper arm. ● Note The vehicles must not touch each other, Fitting the wiper blade otherwise electricity could flow as soon as Insert the wiper blade onto the windscreen ● the positive terminals are connected. wiper arm until it clicks into place.
  • Page 64 The essentials Changing the rear window wiper blade Removing and fitting the rear window Fig. 82 wiper blade. Removing the wiper blade Lift the wiper arm away from the glass ● Slide the blade adapter in the direction of ● ›››...
  • Page 65: Safety

    Observe traffic laws and speed limits. – Ensure that the passenger in the central – rear seat always has the head restraint in Always reduce your speed as appropriate WARNING – the correct position for use.
  • Page 66: Pants

    Safety Correct position of the vehi- risk of injury. The following points cover part of the safety equipment in your SEAT cle occupants three-point seat belts, ● Belt tension limiter for the front and rear Correct sitting position for the driv- ●...
  • Page 67 Adjustment of the driver's seat page 148. senger and the driver is wearing his or her seat belt correctly. WARNING For your own safety and to reduce the risk of Adjust the head restraint properly to ach- ●...
  • Page 68 It is possible to deactivate the front passen- WARNING is in an upright position and the front pas- ger airbag in exceptional circumstances senger is wearing his or her seat belt prop- If the passengers in the rear seats are not ● ›››...
  • Page 69 Never put your feet out of a window. ● Never put your feet on the dash panel. ● Never put your feet on the surface of a seat. ● Do not allow anyone to travel in the foot- ● well.
  • Page 70: Pedal Area

    ››› Fig. vehicle. Do not swap the centre rear head re- ● straint with either of the outer seat rear Wear suitable footwear head restraints. Risk of injury in case of an accident! Always wear shoes which support your feet properly and give you a good feeling for the Head restraint position warning label.
  • Page 71: Seat Belts

    Your vehicle has five seats, two in the front clutch or accelerator pedal. Risk of acci- dent! and three in the rear. Each seat is equipped with a three-point seat belt. WARNING Dashboard: right rear seat occupied Fig.
  • Page 72 The front airbags, for example, are only When a seat belt in the rear seats is fastened den braking. triggered in some cases of head-on collision.
  • Page 73 Always keep both feet in the footwell in ● replaced by a specialised workshop. Re- front of your seat as long as the vehicle is in newal may be necessary even if there is no motion. apparent damage. The belt anchorage Never unbuckle a seat belt while the ve- ●...
  • Page 74: How To Properly Adjust Your Seat Belt

    Passengers in from 25 km/h (15 mph) to 50 km/h (30 mph), the rear seats who do not use seat belts en- for example, the corresponding kinetic ener- danger not only themselves but also the front gy is multiplied by four.
  • Page 75: Seat Belt Tensioners

    The seat belt must lie flat and fit The automatic belt retractors on the front comfortably on the torso seats are fitted with seat belt tensioners The lap part of the seat belt must lie ●...
  • Page 76: Airbag System

    Safety Airbag system The seat belts for the front and side rear oc- belt tensioners function incorrectly or may cupants are equipped with belt tensioners. not function at all. The belt tensioners are activated by sensors, So that the effectiveness of the seat belt ten-...
  • Page 77 Always maintain the greatest possible dis- key-operated switch for front passenger ● If you are not wearing a seat belt, or if ● tance between yourself and the front airbag. airbag, you lean forward or to the side while travel-...
  • Page 78: Safety Instructions About Airbags

    ● WARNING activating in each situation cannot be gener- light switch is in the courtesy light position); The seat belts and airbags can only pro- alised. Some factors play an important role, ● the hazard warning lights switch on; ●...
  • Page 79 Never drive if the interior door panels ● WARNING reducing the airbag's effectiveness. have been removed or if the panels have If you do not wear a seat belt, if you lean ● Any damage to the original seat uphols- not been correctly fitted. ●...
  • Page 80: Deactivating Airbags

    The side and head airbags are managed ● travelling. through sensors located in the interior of the front doors.
  • Page 81 Open the front passenger door. ●  ment SEAT recommends fitting the child seat in the Insert the key into the slot of the switch for ● rear seat to avoid having to deactivate the deactivating the front passenger airbag Fault in airbag system and seat belt tensioners.
  • Page 82: Transporting Children Safely

    WARNING 1): ISOFIX and Top Tether (Peke G1 ISOFIX dren under 12 years of age travel in the rear In the event of a fault in the airbag and seat DUO Plus). seats. Depending on their age, height and belt tensioner system, the airbags and seat...
  • Page 83 ● the front passenger's airbag accident increases. vehicle without being properly secured, or to stand up or kneel on a seat while travel- An inflating front passenger airbag can ● ling. In an accident, the child could be flung Read the additional information carefully...
  • Page 84: Child Seats

    ECE-R 44 or Never tie the retainer strap to a hook in ● Child seats ECE-R 129 on the seat (the letter E in a circle the luggage compartment. with the test number below it). Never secure or tie luggage or other ●...
  • Page 85 Anchor points are located at the back of the rear seat back- ›››  rest on the boot side page 30.
  • Page 86: Emergencies

    Emergencies Emergencies Towline anchorage ● Note Box spanner for wheel bolts* ● The first-aid kit and the fire extinguisher ● Jack* are not part of the vehicle's standard ● Self-help equipment. Wire hook for pulling off the wheel covers* / ●...
  • Page 87: Tyre Repair

    If the wheel rim has been damaged. ● A new bottle of sealant can be purchased ● reach the nearest specialised workshop. at SEAT dealerships. In outside temperatures below -20°C ● Replace the repaired tyre with the tyre ● (-4°F).
  • Page 88 Emergencies Contents of the tyre mobility sys- Air bleed screw (it can also be integrated CAUTION in the inflator tube). tem* Switch off the air compressor after a maxi- Warning provided by tyre pressure moni- mum of 8 operational minutes to avoid toring system (it can also be integrated in overheating! Before switching on the air the inflator tube).
  • Page 89: Changing The Windscreen Wiper Blades

    Self-help checked by a specialised workshop and cor- Do not continue driving if the tyre pres- windscreen in the winter to keep it clear of ● rected if necessary. sure is 1.3 bar (19 psi / 130 kPa) and lower. ice.
  • Page 90 Emergencies Indications for tow-starting Note lights will no longer function. Do not have the vehicle towed away. Failure to follow The vehicle can only be tow-started if the Vehicle's should not generally be tow- this instruction could result in an accident. electronic parking brake and, if appropri- started.
  • Page 91 Self-help Anchoring the front tow line Take the towline anchorage from the on- – board tool set. Remove the cover by pressing down on its – right-hand side until it is unclipped ››› Fig. Bolt the anchorage to its limit to the left, in –...
  • Page 92 Emergencies Towing a vehicle equipped with au- WARNING Note tomatic gearbox If the towline anchorage is not screwed in If it is not possible to tow the vehicle in ● ● as far as the stop, there is a risk of the the normal way, or if it has to be towed fur- Certain restrictions must be observed when screw connection shearing off during tow-...
  • Page 93: Fuses And Bulbs

    Fuses and bulbs Fuses and bulbs perage (same colour and markings) and Positions not containing a fuse do not ap- ● size. pear in the following tables. Never repair a fuse. Some of the equipment listed in the ta- Fuses ●...
  • Page 94 Emergencies Consumer/Amps Consumer/Amps Consumer/Amps Steering Column LSS: wiper control Signal Horn Tow Hook Instrument panel Heated seats control unit Tow Hook Right Lights Power Supply BCM Power C63 Right Door Window Control BSD, PDC, MRR Fuse arrangement in engine com- partment Windscreen wipers Light switch, diagnosis input, head-...
  • Page 95: Changing Bulbs

    Fuses and bulbs Depending on how equipped the vehicle is, Consumer/Amps Consumer/Amps there are different sets of headlights and tail Pressure transducer, EPW Solenoid TH4 fan with A/C or T5I for moder- lights: Valve, TOG Sensor, PWM Electric ate climate countries fan, Camshaft Control Valve, Active Halogen headlights.
  • Page 96: Change The Front Bulbs

    Emergencies Remove the bulb connector by pulling it – CAUTION heat generated by the bulb, they will be outwards. deposited on the reflector and will impair Remove the ignition key before working ● its surface. Remove the bulb by pulling it out and fit the –...
  • Page 97 Fuses and bulbs Dipped beam headlight Raise the bonnet. Turn signal light and DRL (daytime – running light) ››› Move the loop Fig. 102 in the direc- – tion of the arrow and remove the cover. ››› Remove the bulb connector Fig.
  • Page 98: Change The Rear Bulbs

    Emergencies Fog light bulb Remove the bulb connector Turn the bulb holder to the left and pull. Remove the bulb by pressing on it and turning it anticlockwise at the same time. Replace the bulb, making sure that the fixing guides are in the right position and then press it and turn it clockwise.
  • Page 99 Fuses and bulbs holder. The securing tabs must click into Note place. For LED lights, you can only change the ● turn signal and reverse light bulbs. CAUTION Take care when removing the rear light unit to make sure there is no damage to the Number plate light paintwork or any of its components.
  • Page 100: Changing The Interior Bulbs

    Emergencies In case of failure, go to an authorised work- Carefully remove the glass, levering it to Luggage compartment light* – shop to have it replaced. avoid possible damage. To replace the bulbs Additional brake light Pull the bulbs outwards. –...
  • Page 101 Fuses and bulbs Change the bulb. – Connect the cable again. – Refit the bulb and press it in until it engages. –...
  • Page 102 Operation Dash panel. Fig. 115...
  • Page 103: Operation

    ....Steering wheel with horn and Front passenger seat heating con- Light switch ......
  • Page 104: Lamps

    Operation Instruments and warn- The vehicle can be fitted with a instrument on the screen of the instrument panel and panel digital lap timer or one Digital (SEAT to the instructions on the screen of the Info- ing/control lamps Cockpit).
  • Page 105 Instruments and warning/control lamps Analogue instrument panel Instrument panel, on dash panel. Fig. 117 ››› Details of the instruments Fig. 117: Engine coolant temperature display Adjuster button and display. ››› page 114 or natural gas gauge in Speedometer. Revolution counter (with the engine run- vehicles with natural gas engine (CNG) ›››...
  • Page 106 SEAT Digital Cockpit on the instrument Fig. 118 panel (classic view). Details of the instruments: The Digital SEAT Cockpit is an instrument All views will display information on the panel digital with monochrome screen in col- screen about audio, phone, travel data, vehi- Engine coolant temperature display our high resolution.
  • Page 107 View 1, 2, 3 or AUTOMATIC* travelled. Personalisation of the information that ap- Assistance systems. Graphic representa- ● pears in the Digital SEAT Cockpit. Only 2 of tion of different assistance systems. these items of information can be displayed Infotainment system: map transfer Fig. 119 Traffic signs.
  • Page 108 107 map is transferred from the Infotainment sys- Outside temperature display ››› Service interval display page 115 tem to the Digital SEAT Cockpit and vice ver- ● If the outside temperature is lower than ap- ››› Speed warning page 108 ●...
  • Page 109 Instruments and warning/control lamps Vehicles with analogue instrument panel: Low consumption driving  Note Briefly press the button ● 0.0/SET Depending on the equipment, when driving, There are different instrument panels and ● ››› Fig. 117 to reset the trip recorder to 0. display appears on the instrument ...
  • Page 110 Travel data (multifunction indica- modify additional functions, according to the as usual. tor) vehicle equipment. SEAT recommends visiting a SEAT dealership for this. Restart the service interval display The display of the travel data (multifunction display) shows different values about the...
  • Page 111 Instruments and warning/control lamps Changing memory (vehicles with digital function wheel pressed down for about 2 less than 2,400 km and cannot be de- instrument cluster) seconds. activated. Distance covered in While in Travel data > General infor- Distance travelled Select the instructions km (m) after switching on the ignition.
  • Page 112 Operation again or wait several seconds. The speed is symbols may vary depending on the version If when switching on the ignition warnings ● stored and the warning activated. of the instrument panel. are shown about existing faults, it might not be possible to change the settings or show Deactivate: press button or button...
  • Page 113 Fatigue detection has been developed ● ››› display page 108. driver has unbuckled their seat belt and for driving on motorways and well paved opened the door. roads only. Conditions of operation In the event of slow driving during a long peri- If there is a fault in the system, have it ●...
  • Page 114 0.0/SET ››› reaches the red zone ish setting the time. We recommend that you avoid high revs and Adjusting the time in the SEAT Digital that you follow the recommendations on the Cockpit gear-change indicator. Consult the addition- ››› al information in...
  • Page 115 Instruments and warning/control lamps Fuel level indicator Control lamps switches off due to lack of fuel or an irregu- lar supply thereof. It lights up, and in addition, the  Always refuel when there is only one ● lower diode lights up in red quarter of fuel in tank to prevent the vehicle Fuel tank almost empty.
  • Page 116 Operation Natural gas level (CNG) Things to note If the vehicle is left parked for a long time im- 3 Valid in vehicles equipped with natural gas en- mediately after refuelling, the natural gas lev- gine (CNG) el indicator may not accurately indicate the same level shown after refuelling when the vehicle is started up again.
  • Page 117 Because of the ● Request an inspection. front of the air inlet reduce the cooling ef- technology used by SEAT, with this service fect of the coolant. At high outside temper- ● Oil service required! you only need to change the oil when the ve- atures and high engine loads, there is a risk ●...
  • Page 118: Using The Instrument Panel

    If the service was not carried out by a SEAT Therefore the service interval display may the gas tanks and an audible warning will be dealership, the display can be reset as fol- not be correct.
  • Page 119 Instruments and warning/control lamps In vehicles with multifunction steering wheel, Operation with the windscreen wip- To open the menu or the informative display ● the multifunction display can only be shown, press button or wait a few seconds er lever operated with the steering wheel buttons.
  • Page 120: Control And Warning Lamps

    Operation Using the multifunction steering wait a few seconds until the menu or the in- The control and warning lamps are indicators ››› ››› formative display opens automatically. of warnings, , faults or certain func- wheel tions. Some control and warning lamps come on when the ignition is switched on, and Changing menu settings switch off when the engine starts running, or...
  • Page 121: Multifunction Steering Wheel

    Instruments and warning/control lamps There are two versions of the multifunction A faulty vehicle represents a risk of acci- ● module: dent for the driver and for other road users. If necessary, switch on the hazard warning Voice-controlled audio, phone and navi- ●...
  • Page 122 Operation Operating the audio, telephone and navigation system with voice control Controls on the steering wheel. Fig. 128 Applies to vehicles with analogue instrument panel Button Radio Media (except AUX) Telephone* Navigation* Turn announcement volume up/down. You do not need to Turn volume up/down.
  • Page 123 This action can be performed when you are listening to the radio; there is no need to be in audio-radio mode. These actions can be performed when you are listening to media; there is no need to be in audio-radio mode. Applies to vehicles with Active Info Display (Digital SEAT Cockpit) Button...
  • Page 124 Operation Button Radio Media (except AUX) Telephone* Navigation* Change menu on instrument panel. Short press : change views Classic Info / Digital Maps / Semi-circular clocks Long press : access settings of “Individual Profiles”. If there is a map on the Digital –...
  • Page 125 Instruments and warning/control lamps Operating the audio, telephone and navigation system without voice control Controls on the steering wheel. Fig. 129 Button Radio Media (except AUX) Telephone* Navigation* Turn announcement volume up/down. You do not need to Turn volume up/down. You do Turn volume up/down.
  • Page 126 Operation Button Radio Media (except AUX) Telephone* Navigation* Cycles through the audio source: FM/AM – CD – SD - USB - AUX - BT Audio (only those that are available). This function can be used from any mode (audio, media, navigation, assistants, vehicle status, travel data). –...
  • Page 127: Opening And Closing

    Opening and closing Opening and closing Duplicate keys Remote control* If you need a replacement key, go to a Tech- nical Service with your vehicle identification Keys number. Set of keys WARNING An incorrect use of the keys can cause ●...
  • Page 128 Operation ››› Locking the vehicle Fig. 131 SEAT recommends you ask a specialised  If the vehicle cannot be unlocked or ● workshop to replace the battery. locked by using the radio frequency remote Unlocking the rear lid. Press button ...
  • Page 129: Central Locking System

    Opening and closing Spare remote control keys are available at – Locking system “Safe*” For the sake of the environment your Technical Service, where they must be – Selective* unlocking system Please dispose of your used batteries cor- matched to the locking system. –...
  • Page 130 Operation When the ignition is switched off, the instru- Safe enabled with or without alarm: con- Note ment panel display indicates that the “Safe” tinuous flashing of warning lamp. For anti-theft security, only the driver door system is on. Safe disabled without alarm: the warning is fitted with a lock cylinder.
  • Page 131 Opening and closing In vehicles fitted with an alarm, see the Anti- Automatic speed-dependent lock- Note ››› theft Alarm section page 133. ing and unlocking system* If the airbags are triggered during an acci- Using the remote control, press the unlock dent, the vehicle is unlocked, except for the This is a safety system which prevents access button on the remote...
  • Page 132 Operation Locking the doors and rear lid prevents ac- ● cess from the outside (for safety reasons, e.g. when stopped at a traffic light). The driver door cannot be locked while it is ● open. This avoids the user from forgetting his key inside the vehicle.
  • Page 133 Opening and closing Once the doors have been locked, they can- Unlocking the vehicle is confirmed with a Touch (once) the locking sensor surface ● not be opened again immediately. This will double flash of the indicator lights; locking by (arrow) on the driver door handle.
  • Page 134 (arrow) of the door operation of the Keyless Access system. Contact a specialised workshop. SEAT...
  • Page 135: Anti-Theft Alarm

    Opening and closing ››› Childproof lock for the left-hand side doors Fig. 140 recommends visiting a SEAT dealership for clockwise for the right-hand side doors. this. Depending on the function set on the in- ● Deactivating the childproof lock fotainment system for the mirrors, the exte-...
  • Page 136 Operation signal light located on the driver door will The rear lid is opened. the vehicle is opened using the driver door ● flash along with the turn signals, indicating key. Ignition switched on with a non-validated ● that the alarm and the locking security sys- key.
  • Page 137 Opening and closing Vehicle interior monitoring and an- on. In order to activate it, all the doors and the alarm is switched on again, unless it is the rear lid must be closed. ti-tow system* deliberately switched off. If you wish to switch off the vehicle interior If the alarm has been triggered by the ●...
  • Page 138: Rear Lid

    Operation Controls for the windows and, using the Infotainment system, select: The rear lid must not be opened when the ● Infotainment button and then the   reverse or rear fog lights are lit. This may SETTINGS > Opening and closing > damage the tail lights.
  • Page 139 Opening and closing passenger door has been opened and the If the window is still obstructed, the window ● Therefore always take the key with you ● key has not been removed from the ignition. will stop at this point. when you leave the vehicle.
  • Page 140 Operation Convenience opening and closing Resetting one-touch opening and closing WARNING The automatic open and close function will – Never close the windows without due ● Use the convenience opening/closing func- not work if the battery has been temporarily care or proper control. There is a risk of suf- tion to easily open/close all the windows disconnected.
  • Page 141: Lights And Visibility

    Lights and visibility Lights and visibility verified. They will switch off after a few sec- Automatic dipped beam control onds.  Lights WARNING The automatic dipped beam control is merely ››› intended as an aid and is not able to recog- Observe the safety warnings in Warn- Control lamps...
  • Page 142 Operation Daytime running lights Fog lights ly has one position. The lamp on the instru-  ment panel lights up. The daytime running lights consist of individu- al lights, integrated in the front headlights. By connecting the daytime running lights, these Turn signal and main beam lever ›››...
  • Page 143 Lights and visibility In vehicles that do not have the correspond- lights, the tail lights and the number plate lights are switched on. The warning lamp  ing menu, this function can be deactivated in light will light up to provide assistance. then comes on in the instrument panel.
  • Page 144 Operation Reverse gear justment of the headlights to avoid dazzling Note other drivers. When engaging the reverse gear, both fog ● To activate the Coming/Leaving home ● lights turn on. In such cases, the regulations specify certain function, the rotary light switch must be in light values that must be complied with for position and the light sensor must de-...
  • Page 145 Lights and visibility Headlight range control If your vehicle breaks down: Value Vehicle load status 1. Park your vehicle at a safe distance from Driver only, luggage compartment full  moving traffic. With trailer and maximum drawbar load. 2. Press the button to switch on the hazard If the vehicle load does not correspond to those ›››...
  • Page 146: Interior Lights

    If your vehicle is equipped with a digital in- scribed here is subject to the relevant stat- Note strument panel (Digital SEAT Cockpit), the utory requirements. following message will appear Turn on the If not all the vehicle doors are closed, the on the instrument panel.
  • Page 147: Visibility

    Lights and visibility Visibility WARNING when normal operating conditions are re- established. Folded sun blinds can reduce visibility. Heated rear window Always store sun blinds and visors in their ● housing when not in use. Sun visors Windscreen wiper and rear window wiper systems Windscreen wiper and window wip- With the air conditioning controls:...
  • Page 148: Rear View Mirrors

    Operation Interior mirror with automatic anti-dazzle WARNING If you stop the vehicle with the wind- ● function* screen wiper in position 1 or 2, it will auto- The rain sensor* may not detect enough matically change to a lower position The anti-dazzle function is activated every rain to switch on the wipers.
  • Page 149 Lights and visibility 3. Turn the knob to position R (right exterior Fold the rearview mirrors when locking the Note mirror). vehicle* Before washing the vehicle with an auto- The Easy Connect system, the but- 4. Swivel the rotary knob to position the exte- ...
  • Page 150: Seats And Head Restraints

    Otherwise, it is an unnecessary fuel waste. ● restraints height into forwards/backwards position. Injuries can be caused if the seat height is Note adjusted without due care and attention. Adjusting the front seats If the electrical adjustment ever fails to ●...
  • Page 151: Seat Functions

    ››› child seat page 80. After removing a sponding backrest must be partially folded child seat, remount the head restraint im- Adjustment of the rear head re- forward. mediately. Travelling with the head re- straints straints removed or improperly adjusted in- ›››...
  • Page 152 Press the button repeatedly until the using the seat heater.   desired temperature is reached. Do not sit on the seat with clothing that is ● wet or damp. Deactivating Do not leave clothing that is wet or damp ●...
  • Page 153 Fold down the rear seats Removable seat covers WARNING Please be careful when folding back the ● backrest! Injuries can be caused if the seat height is adjusted without due care and at- tention. Do no trap or damage seat belts when ●...
  • Page 154 Operation Putting the cover Note Move the seat backwards until the anchor ● If using the seats without removable cov- ● point of the zip is completely accessible ers, the handle of the zip must be at the start of the zip.
  • Page 155: Transport And Practical Equipment

    1.5 kg. in order to reduce the risk of injury caused Practical equipment by a sudden braking or by an accident. Storage pocket in the seat* Glove compartment Storage compartment under the front seats* Storage pocket.
  • Page 156 Operation Front drink holder* Front ashtray* Electrical power socket Front drink holders in the centre con- Ashtray in the centre console. Front power socket. Fig. 157 Fig. 158 Fig. 159 sole. Opening and closing the ashtray The 12 Volt cigarette lighter power socket can In the central console, next to the hand brake, also be used for other electrical components To open the ashtray, lift the cover...
  • Page 157: Luggage Compartment

    Transport and practical equipment Distribute the load evenly in the luggage – Note Using the lighter carefully. Carelessness ● compartment. or negligence when using the cigarette The use of electrical appliances with the ● lighter can cause burns and serious inju- Place heavy objects as far forward as pos- –...
  • Page 158 Operation Note Never exceed the allowed axle weights or ● allowed maximum weight. If said weights The tyre pressure must be adjusted ac- ● are exceeded, the driving characteristics of cording to the load. When necessary, the vehicle may change, leading to acci- check the tyre pressures on the adhesive dents, injuries and damage to the vehicle.
  • Page 159 Do not place heavy or hard objects on the noeuvres or accidents. rear shelf, because they will endanger the Never secure a child seat on the fasten- ● vehicle occupants in case of sudden brak- ing rings.
  • Page 160 Move the floor forward over the supports as ● Always secure objects, even when the far as the rear seat backrest and then lower ● luggage compartment floor is properly lif- the floor with the handle ted.
  • Page 161: Roof Carrier

    Note means that the vehicle uses more fuel. belts or retaining straps that are suitable SEAT recommends the use of straps to se- and in a good condition. cure objects to retaining rings. Bulky, heavy, long or flat loads have a ●...
  • Page 162 Suitable acces- mum weight limit for the roof carrier which is boards, etc. sories can be acquired at SEAT dealerships. listed in the fitting instructions. Do not modify or repair the crossbars or ●...
  • Page 163: Air Conditioning

    Air conditioning Air conditioning WARNING ged, so as to maintain good visibility of ev- erything outside. If the load is loose or not secured, it could The maximum heat output required to de- Heating, ventilation and ● fall from the roof carrier system or cause frost windows as quickly as possible is only accidents and injuries.
  • Page 164 Operation to prevent further damage and have it structing these slots with any kind of ob- To ensure correct operation, the grilles ● checked by a specialised workshop. ject. on both sides of the screen must not be ob- structed. Repairs to the air conditioner require spe- The air conditioner operates most effec- ●...
  • Page 165 Air conditioning Air outlets Air vents. Fig. 168 To ensure proper heating, cooling and venti- Air recirculation Press the button, the button’s lamp will ●  lation in the vehicle interior, air vents light up, indicating that air recirculation inside ›››...
  • Page 166: Heating And Fresh Air

    Operation Note can quickly mist over. Therefore, never If the function is not deactivated by ● leave the air recirculation mode switched pressing the button, it will deactivate after Activating air recirculation automatically ● on for a long time (risk of accident). approximately 20 minutes.
  • Page 167 Air conditioning – Air distribution to upper body. Turn blower switch to any of the levels Close the central outlets. ● ●  1-4. Open and turn the side outlets towards the ● – Air distribution to footwell.  Set the airflow to the desired direction using windows.
  • Page 168: Manual Air Conditioning

    Operation Manual air conditioning* Controls Air conditioning controls on the dash pan- Fig. 170 ››› Temperature selector page 166 Functions WARNING Blower control. There are four speed set- For your safety, the windows should never Interior heating tings for the blower. At low speed, it is rec- be fogged up or covered with snow or ice.
  • Page 169 Air conditioning Set the air distribution regulator to the Turn the blower switch to any of the settings Open and turn the side outlets towards the ● ● ● air flow configuration desired: (towards the 1-4. windows.  windscreen), (towards the chest), (to- ...
  • Page 170: Climatronic

    Operation Climatronic* General notes Climatronic: controls. Fig. 171 Read the additional information carefully Climatronic description Switching off the Climatronic ›››  page 42 ››› Cooling only works if the following conditions Adjust fan power to zero Fig. 171 ● are met: press the button.
  • Page 171 Air conditioning Adjust the vents so that the air flow is direc- It is possible to select interior temperatures Switching off windscreen defrosting ● ted slightly upwards. from +16°C (+64°F) to +29°C (+84°F). In this Press the button several times or ●...
  • Page 172: Infotainment System

    Infotainment System Infotainment System WARNING WARNING Distracting the driver in any way can lead Connecting, inserting or removing a data to an accident and cause injuries. Operat- medium while driving can distract your at- Introduction ing the Infotainment system can distract tention from the traffic and cause an acci- your attention from the traffic.
  • Page 173 Introduction CAUTION Always keep the armrest closed while the ● vehicle is in motion. Any foreign objects stuck to a data storage device and non-round media may damage WARNING the CD player. Only clean, standard 12-cm CDs should ● Opening a CD player's housing can lead to be used.
  • Page 174: Overview Of The Unit

    Infotainment System Overview of the unit Media System Touch / Media System Colour Overview of the controls (this configura- Fig. 172 tion depends on the version). ››› Radio Mode (change of band frequency Phone Mode page 209 ››› page 190 ›››...
  • Page 175 Introduction Media System Plus / Navi System Overview of the controls (this configura- Fig. 173 tion depends on the version). Radio Mode (change of band frequency Settings button (search and selection) ››› ››› page 190 page 174 ››› ››› Touchscreen page 175 Phone Mode page 209...
  • Page 176: General Instructions For Use

    Infotainment System General instructions for use Infotainment buttons Restrictions on the use of devices using ● Bluetooth ® technology may apply in some The buttons on the unit are shown in this countries. For further information, contact manual with the word “infotainment button” Introduction the local authorities.
  • Page 177 Introduction Muting the Infotainment system sound stops If the battery has been disconnected, the ● the media source that is playing The screen ignition must be activated before switching displays  on the Infotainment system. Note Changing the basic volume If the base volume has been considerably increased to play a certain audio source, lower the volume again before switching to...
  • Page 178 Infotainment System ››› viewing images page 191 can be en- Opening list entries and searching Display and function buttons: operation larged or reduced. To do so, enlarge or re- in lists and effect duce the image displayed by moving two fin- Press it on some lists to move up a level, gers.
  • Page 179 Introduction Briefly press the screen above or below the Subsequent chapters only explain those Overview of the function buttons ● scroll marker. functions that differ from those in the screen Function icon and text: operation and ef- shown in the figure. OR: Place a finger over the scroll marker ●...
  • Page 180 Infotainment System Proximity sensors Initial configuration wizard Function button: function 3 Valid for: Media System Plus/Navi System Disables the possibility of changing the settings of the Infotainment sys- The Infotainment system is equipped with an tem. If you want to perform the initial ›››...
  • Page 181: Connectivity

    SEAT recommends the use of the Apps ● nication between the Infotainment System that SEAT provides for this vehicle. and mobile devices: To make full use of SEAT Apps, you must ● ® MirrorLink ● activate the option , Settings/System >...
  • Page 182 SEAT cannot be held liable for any dam- ● age caused to the vehicle as a result of the use of applications that are of poor quality...
  • Page 183 Mirror Link Check smartphone compatibility: – www.mirrorlink.com/phones ® MirrorLink 1.1 or higher – Some of the Apps certified by SEAT or – the CCC must be installed in the de- vice. Android Auto Check smartphone compatibility. An- – droid Auto™: www.android.com/auto/ Android 5.0 (Lollipop) or higher...
  • Page 184 USB ports In the main menu for the Full Link setup, se- ● are properly con- Try another compatible mo- lect Activate data transfer for SEAT nected. Full Link Setup Fig. 183 bile device. ››› Fig.
  • Page 185 Note Function button: function In order to use Android Auto™ technology ● : allows Activating data transfers for SEAT applications  Full Link menu Fig. 185 it is necessary to download the Android the exchange of information between the vehicle and Auto™...
  • Page 186 Infotainment System ® MirrorLink the portable device on the Infotainment sys- Function button: function tem screen. Press to close the open apps. To avoid distracting the driver while driving, Then press the apps to be only specially adapted applications can be closed or the function CLOSE APPS...
  • Page 187 The mobile device must be compatible with connection. ● To return to the basic contents of the Infotain- Android Auto™. ment system, press the Return to SEAT A pop-up screen will appear, which will re- ● » button. quest that you accept the device.
  • Page 188 Frequently asked questions about Full Link ® Where can I find compatible apps? Can MirrorLink be installed in a previous SEAT model? Compatible apps can be found on the following links: What is the connection method? www.mirrorlink.com/ No, this is not possible.
  • Page 189: Seat Media Control

    The SEAT Media Control app can be used You can obtain information about technical to remotely operate some partial functions in requirements on the SEAT website or at SEAT The Infotainment System can be operated Radio mode, Media mode and Navigation dealerships.
  • Page 190: Wlan Access Point

    Due to the high volume of data exchanged, struction manual. SEAT recommends the use of a flat rate Activate the mobile device assignment on mobile phone deal for data transmission. ● Mobile phone operators can provide the the Infotainment System.
  • Page 191 Media network (WLAN) page 197. mode and press the SET- SEAT Media Control Press the WPS button on the WLAN router ● TINGS menu. until the warning light on the router starts Press the WLAN menu and then enter Inter- ●...
  • Page 192: Operating Modes

    Infotainment System Operating modes Function button: function Opens the setup menu of the active SETTINGS Radio frequency band (FM, AM or DAB). Selects the previous or next stored sta- Related video tion or of the station list. This setting  ...
  • Page 193: Media

    Operating modes In the Radio main menu, you can store sta- Display: Meaning Functions of the memory buttons tions from all available frequency wave- The tracking of alternative frequencies is lengths on the numbered function buttons. A station logo can be assigned to AF off disabled.
  • Page 194  Do not use memory card adapters. ● : External audio source con- SEAT assumes no liability for any deterio- ● nected to the AUX-IN multimedia ration or loss of files on data storage devi- ›››...
  • Page 195 Operating modes Messages and symbols on the Media main Note Function button: function menu When the media source is inserted, play- ● Repeat all tracks. Display: Meaning ing will not start automatically; it is neces- Repeats all the tracks that are on sary for the user to select the source.
  • Page 196 Infotainment System When a Media source that has already been Insert or eject a CD The CD in the drive will be ejected and ● played is selected again, playback is re- must be removed within approximately 3 Valid for the model: Media System Plus/Navi sumed from the point at which it was stop- 10 seconds.
  • Page 197 Operating modes USB2*. After correctly ejecting the memory Instructions and restrictions Now the data storage device can be dis- ● card from the system, the function button be- connected. Compatibility with Apple™ devices and other comes inactive (grey colour). media players depends on the unit. Note Press the inserted memory card.
  • Page 198 Infotainment System ® Connecting an external audio source to Starting Bluetooth audio transfer The available functions will depend on the the AUX-IN multimedia socket Bluetooth ® Audio profile that the connected Activate Bluetooth ® visibility on the external ● external player supports. Lower the base volume on the Infotainment Bluetooth ®...
  • Page 199 Operating modes Connecting an external audio In the MEDIA main menu, press the The image files must be stored on a compati- ● SOURCE function button and select ble data storage device (e.g., a CD or an SD WLAN source through WLAN* card).
  • Page 200: Navigation

    Infotainment System Requirements for viewing images The destination is defined by entering an ad- Function button: function dress or a point of interest, e.g. a petrol sta- Image files Maximum resolu- To change to the PREVIOUS or tion or hotel. Traffic reports, if any, will also be tion image.
  • Page 201 The current navigation data can be downloa- main Navigation menu The navigation memory card may not be ● ded in the internet at www.seat.com and stor- used as memory for other files. The info- Function button: function ed in a SD card compatible with the unit.
  • Page 202 Infotainment System In the Navigation main menu, press the not in the postcode area you have selected ● Function button: function function button. in a previous window, you will not be able to New destination : To enter a new destination find the street at the street selection stage.
  • Page 203 Operating modes After starting route guidance For other adjustments to the navigation rec- Route criteria: Meaning ommendations, select Navigation > Set- Orange route: Shortest route to the destination, tings > Navigation announcements even if it results in longer travelling time. The route settings.
  • Page 204 Infotainment System Routes  Function button: function Destination. In the Route mode, you can define various Estimated time of arrival at destina- : View route information for current route. Route details destinations (final destination and stopovers).  tion. The starting point of a route is always the Calculated distance to destination.
  • Page 205 Operating modes stored home address can be edited or over- Points of interest (POI) Stop To stop route guidance to the active written. destination. If a home address has already been stored, To move a stopover or a destination to route guidance will be started to the stored another position on the list.
  • Page 206 Infotainment System Selecting a point of interest on the map Split screen Function button: function Function button: function Map display in three dimensions (bird's eye view). There are several points of interest in the area. Press this symbol to open a list of points of in- Buildings are also displayed in three ...
  • Page 207 Operating modes Function button: function Function button: function Function button: function : current vehicle position in coordinates and (only when demo mode is active) View map scale. Turn the setup button or Position Demo mode start GPS status (satellite reception). move your fingers together/apart on the ...
  • Page 208 Infotainment System Traffic reports and dynamic route If during route guidance a traffic report is re- Predictive navigation ceived that affects the route being travelled, guidance to the destination (TRAF- an alternative route will be searched for if the FIC) Infotainment system calculates that time can be saved.
  • Page 209 Operating modes Importing vCards (electronic busi- Importing Personal POI Navigation with images ness cards) Importing the Personal POI to a points of interest destination memory Importing vCards to the destination mem- Insert the data storage device with the stor- ● ed Personal POI or connect it to the Infotain- Insert the data storage device with the stor- ●...
  • Page 210: Vehicle Menu

    Infotainment System Route guidance in Demo mode With the function button View you can ac- sumption devices is obtained. It is shown via a cess the following information: consumption indicator bar in l/h (gal/h) If demo mode is activated in the Navigation menu, an additional pop-up win- Instrument panel Driving data...
  • Page 211: Telephone

    Bluetooth ® countries. For further information, contact If a mobile telephone is not secured or is in- products, ask your nearest SEAT dealer or the local authorities. correctly secured in the vehicle, it could check on the internet.
  • Page 212 Infotainment System ® no active Bluetooth connection with other warnings in its instruction manual. Only use tooth ® connection to the telephone man- devices. compatible Bluetooth ® devices. agement system. Bluetooth ® connections are free. CAUTION Bluetooth ® is a registered trademark of Blue- Places with special regulations tooth ®...
  • Page 213 Operating modes Follow instructions in the manual for the mo- main Telephone screen and you can edit this Note bile telephone. name via the menu Bluetooth settings To prevent them from being heard through During the pairing process, it is necessary to The search process can take up to 1 minute.
  • Page 214 Infotainment System the requests have been accepted in the mo- matically re-established as soon as the de- Assign a user profile bile phone. The duration of the loading proc- vice is once again within Bluetooth ® range. The data from the phonebook, the call lists ess depends on the amount of data stored on and the stored speed dial buttons are as- WARNING...
  • Page 215 Operating modes Display and symbols of the tele- ››› Function button: function Display: Meaning Fig. 210 phone management system Name of connected mobile tele- Press to mute the microphone during an ac-  phone. Press the icon to the left to tive call and to reactivate it.
  • Page 216: Multimedia

    Enter the coun- ent countries. If you are not able to use you can enter the character “ + ”. try code these services contact an authorised SEAT Press the function button workshop. approx. 2 seconds to add the + .
  • Page 217 Qi technol- ››› console Fig. 212. ogy, please check your mobile phone's user manual or visit the SEAT website. The operating description is located in ››› page 191. “Mobile Signal Amplifier” The “Mobile Signal Amplifier” allows you to Centre console: Connectivity Box Fig.
  • Page 218 Infotainment System WARNING When a telephone with Qi technology is ● connected by USB, the charging will be The mobile phone may heat up due to the performed through the medium specified wireless charging. Think about the temper- by each mobile device manufacturer. ature of your device before you pick it up, and take care when removing it.
  • Page 219: Driving

    The engine can only be started using a genu- ine SEAT key with its correct code. Each time that the vehicle is restarted, the ig- nition key must be turned to position .
  • Page 220 The engine can only be started using a genu- warning lamp goes out. throttle and over-loading the engine. Risk of engine damage. ine SEAT key with its correct code. The vehicle should not be pushed or tow- ● Move the gearbox lever to the neutral posi- –...
  • Page 221 If the fuel tank has been completely run dry, it engine with the vehicle stationary. You ed if genuine SEAT keys are used. may take longer than normal (up to one mi- should drive off as soon as you start the en- nute) to start a diesel engine after refuelling.
  • Page 222 Driving heat accumulated in the engine compart- The vehicle engine can be started with a ignition remains switched on. Make sure ment or due to its prolonged exposure to so- starter button (Press & Drive). To do so, there that the ignition is switched off before leav- lar radiation.
  • Page 223 Fig. 217, as close as connect the ignition manually and, if ap- The driver's seat belt is not fastened, ● possible to the Kessy logo. propriate, take into account the instruc- the driver does not step on any pedal, ●...
  • Page 224 Driving Starting the engine pen that would cause damage, fire or seri- When starting with a cold engine, noise ● ous injury. levels may briefly increase. This is quite 3 Applies to vehicles with start button normal, and no cause for concern. Starting the engine with the start- When the outside temperature is below WARNING...
  • Page 225: Braking And Parking

    Start and driving “My Beat” Function ton stays on, since, even though the engine is WARNING off, the Start-Stop system is active. Never switch off the engine while the vehi- For vehicles with a convenience key there is When the engine cannot be stated again ●...
  • Page 226 Driving WARNING WARNING can form in the brake system. This reduces the efficiency of the brakes. Longer braking distances and faults in the If the brake warning lamp does not go out ● Non-standard or damaged front spoilers ● brake system increase the risk of acci- or if it lights up when driving, the brake fluid could restrict the airflow to the brakes and dents.
  • Page 227 Start and driving away. Always apply the handbrake when you Secure the vehicle as usual by applying the ● In vehicles with an automatic gearbox, leave your vehicle and when you park. handbrake firmly and putting it in 1st gear. place the gear lever in position P.
  • Page 228: Braking And Stability Systems

    Driving Braking and stability sys- The control lamps light up together when the When the vehicle is stuck, to rock it back- ● ignition is switched on and should turn off af- wards and forwards. tems ter approximately 2 seconds. This is the time Press the button to switch the ASR back on taken for the function check.
  • Page 229 Start and driving off and then on again. If the control lamp Traction control system (ASR) When the vehicle is bogged-down, to free it ● goes out, this means the system is fully func- by “rocking it”. tional. The traction control system prevents the driv- The ASR should be switched on again as en wheels from spinning when the vehicle is soon as possible.
  • Page 230 Driving ESC in “Sport” mode Activate ASR of the tyres can cause the system to re- duce engine power when this is not desired. Sport mode can be connected via the Easy The Easy Connect system menu ››› ›››  ...
  • Page 231 Start and driving Electronic differential lock (EDS)* Control lamp How the ABS works A malfunction in the EDL is indicated by the If one of the wheels turns too slowly in relation The EDL operates along with the ABS in vehi- ESC control lamp .
  • Page 232 Driving vehicle to a specialised workshop as soon as Do not reduce the pressure on the brake ped- If the brake system warning lamp ●  possible. al, since the brake assist system switches off should light up together with the ABS warn- automatically as soon as you release the ing lamp , stop the vehicle immediately...
  • Page 233 Start and driving Electronic torque management skidding during the accident, which could considerably harder to make up for the lack lead to further collisions. of servo assistance. (XDS)* The multi-collision brake works for front, side WARNING When taking a curve, the driveshaft differen- or rear accidents, when the airbag control tial mechanism allows the outer wheel to turn The braking distance can also be affected...
  • Page 234: Manual Gearbox

    Driving The system maintains brake pressure for ap- WARNING When following a line of traffic uphill, if ● proximately two seconds after the driver you want to prevent the vehicle from rolling When the engine is running, the vehicle ● takes his foot off the brake pedal to prevent back accidentally when starting off, hold will start to move as soon as a gear is en-...
  • Page 235 Start and driving Automatic gearbox/DSG au- R – Reverse gear  Flashes green Reverse gear must be engaged only when tomatic gearbox* The interlock button on the selector lever is not the vehicle is stationary and the engine is pressed. ›››...
  • Page 236 Driving In certain circumstances (i.e. traffic hold-ups, ning. This is because an automatic gearbox tor and let the engine speed drop to idling short stops, etc.) and to improve comfort, the still transmits power even at idling speed, before selecting gear range D or S again. vehicle can start up in the D2 gear ratio and the vehicle tends to “creep”.
  • Page 237 Start and driving Press the brake pedal and, at the same Interlock button – If the vehicle still does not move in the – time, hold the lock button in the direction of required direction, there is a system The interlock button on the selector lever ›››...
  • Page 238 Driving Engaging gears with the tiptronic Changing gear manually with the selector With the selector lever in position D/S, if no – lever paddle is operated during a short period of mode* time, the gearbox control system switches It is possible to change to tiptronic mode, back to automatic mode.
  • Page 239 Start and driving the selector lever to the desired position, for Starting off uphill To avoid rolling back on gradients always ● ››› instance D page 233, and release the hold the vehicle with the footbrake or Apply the handbrake. –...
  • Page 240 Launch control program After moving off, the ESC “sport” mode ● mode from the SEAT Drive Profile* should be deactivated by briefly pressing 3 Valid for vehicles: with Launch-Control/6- ››› page 274.
  • Page 241 If other users drive your vehicle, warn ● D, gradients below 12 %. change down to 3rd gear, on very steep de- them about inertia mode. Select, in SEAT Drive Profile*, Eco mode scents the tiptronic mode may be required. In – ››› page 274.
  • Page 242: Gear-Change Recommendation

    Driving Emergency program sage switch off, have the fault corrected by a Continue driving at moderate speeds. When specialised workshop without delay. If the the warning lamp switches off, you can con- warning lamp and the driver message do not tinue driving in a normal manner.
  • Page 243: Steering

    Start and driving show a recommendation with the gear num- long as the key remains in the ignition. How- The responsibility of choosing the correct ● ber that would be advisable to save fuel. ever, more effort than normal will be required gear depending on the situation (e.g.
  • Page 244: Run-In And Economical Driving

    Driving thereby causing a small turn of the wheel in Control lamp The control lamp should light up for a few ››› the correct direction to avoid skidding seconds when the ignition is switched on. It should go out once the engine is started. ...
  • Page 245 Reduction of the quantity of thinner in the ● increased and its oil consumption reduced. the design, choice of materials and manufac- protective wax for cavities. ture of your new SEAT. Use of plastic film as protection during vehi- ● cle transport. Constructive measures to encourage re- Running-in of tyres and brake pads Use of solvent-free adhesives.
  • Page 246 Driving Economical and environmentally- Change gear early to save energy to drive off immediately after starting the en- gine. Avoid running the engine at high speed. friendly driving An effective way of saving fuel is to change up quickly through the gears. Running the en- Periodic maintenance Fuel consumption, environmental pollution gine at high rpm in the lower gears uses an...
  • Page 247: Engine Management And Emission Control

    Examples of devices that use a lot of electricity are: the WARNING blower at high speeds, the rear window heat- Because of the high temperatures which ● ing or the seat heaters*. can occur in the exhaust purification sys-...
  • Page 248 Driving Catalytic converter For the sake of the environment  It lights up Even when the emission control system is Fault in the management of the petrol engine. To maintain the useful life of the catalytic working perfectly, there may be a smell of Have the engine checked by a specialised workshop converter sulphur from the exhaust gas under some...
  • Page 249: Driving Tips

    Whenever driving through water, the ● repairs. Start-Stop system* must be switched off ››› page 248. SEAT importers and distributors will gladly provide information about the technical prep- aration that your vehicle requires and also...
  • Page 250: Driver Assistance Systems

    Driving Driver assistance systems Description and operation Vehicles with a manual gearbox Before stopping the vehicle or when it is ● stopped, put it into neutral and release the Start-Stop system* clutch pedal. The engine will switch off. The warning lamp will appear on the instru- ...
  • Page 251 Driver assistance systems The driver must have their seat belt fas- After engaging reverse gear. If the selector lever is placed in position R dur- ● ● tened. ing the stopping phase, the engine will start In case of a very steep gradient.
  • Page 252: Cruise Control System (Ccs)

    Driving Cruise control system Manually switching on/off the CAUTION Start-Stop system (CCS)* The Start-Stop system must always be switched off when driving through flooded ››› areas page 250. Control lamp Note  It lights up green In vehicles with an automatic gearbox, ●...
  • Page 253 Driver assistance systems Cruise control operation CCS temporarily switched off. The set If the brake pedal is pressed. ● speed is displayed in small or darkened If the airbag is triggered. ● figures. ® If the gear lever of the DSG dual clutch ●...
  • Page 254: Speed Limiter

    Driving Speed limiter Display indications WARNING After use, always switch off the speed limit- Control lamp er to prevent the speed being regulated against your wishes. It lights up green The speed limiter does not relieve the  ● driver of their responsibility to drive at the The speed limiter is switched on and active.
  • Page 255 Driver assistance systems Operate the speed limiter On the left of the steering column: On the left of the steering column: Fig. 228 Fig. 229 control and buttons to operate the speed limit- third lever for operating the speed limiter. ›››...
  • Page 256 Driving ››› Position of the turn signal lever Fig. 228 Function Effect ››› or the third lever Fig. 229 The speed is limited to the set speed as soon as the Press button on the turn signal lever or move the third lever into po- Switching the speed limiter on again speed you are driving at is lower than the speed set as sition...
  • Page 257: Emergency Braking Assistance System

    Driver assistance systems After overtaking, the speed limiter can be pending on how critical the situation is. Initial- only completely switched off when the switched on with the previously set speed by ly it warns the driver, and if the driver’s reac- driver stops pressing the accelerator at pressing button on the turn signal lever in...
  • Page 258 Driving indication on the instrument panel display Driver emergency braking assistance sys- Adapt your speed and safe distance to ●  the vehicle in front of you at all times to suit visibility, weather, road and traffic condi- Faced with an imminent collision, the system The timing of the warning varies depending tions.
  • Page 259: Front Assist)

    If the front of the vehicle is not properly re- paired or structural modifications are made to it, for example if the suspension is lowered, Front Assist operation may be affected. SEAT recommends visiting a SEAT dealership for this purpose.
  • Page 260 When the vehicle is to be towed. ● ing) and the distance warning. Advance ● If the vehicle is on a test bed. ● SEAT recommends leaving the Front Assist al- Medium ● When the radar sensor is damaged. ● ››› ways switched on. Exceptions...
  • Page 261 Driver assistance systems System limitations In case of snow or heavy rain. ● In case of narrow vehicles, such as motor- ● The Front Assist has certain physical limita- bikes. tions inherent to the system. Thus, in certain Misaligned vehicles. ●...
  • Page 262 Repairs to the radar sensor require spe- ● a fixed obstacle, such as the tail of a traffic cialist knowledge and special tools. SEAT Driver intervention prompt jam, a damaged vehicle or a vehicle stop- recommends visiting a SEAT dealership for ped at the traffic lights.
  • Page 263 Driver assistance systems Distance from the vehicle ahead. ACC is WARNING The ACC is not currently availa-  not active and is not regulating your dis- ble. ››› Observe the safety warnings in Warn- tance. ing symbols on page 118. With the vehicle stationary, switch off the engine and Vehicle ahead detected.
  • Page 264 Repairs to the radar sensor require spe- ● When the radar sensor begins to operate cialist knowledge and special tools. SEAT properly again, the ACC will automatically recommends visiting a SEAT dealership for be available again. The message on the in- this purpose.
  • Page 265 263. ification of the distance level. There are 5 dis- function is totally deactivated. Adjusting the default distance level at the ● tance levels to choose from. SEAT recom- ››› start of your journey page 263. If you do not wish to disconnect the ACC, just mends level 3.
  • Page 266 Very long If the ESC is controlling. ● ● ACC: parking brake applied If the driver is not wearing his/her seat belt.  ● In the Easy Connect system you can adjust If several brake lights of the vehicle or elec-...
  • Page 267 Driver assistance systems The ACC is operational as of the 2nd gear Function for preventing overtaking vention by the speed control or adaptive (manual gearbox). in an inside lane cruise control. ACC: engine speed Always be ready to use the brakes! ...
  • Page 268 Driving Deactivating the Adaptive Cruise Note Control ACC temporarily in certain If you do not switch off the ACC in the situations aforementioned situations, you may com- mit a legal offence. In the following situations the Adaptive Cruise Control (ACC) should be deactivated due to ›››...
  • Page 269 Driver assistance systems When the ACC halts the vehicle (e.g. traffic Driving through a bend when overtaking them. In these cases, you jam), the instrument panel display shows the should brake as necessary. On entering or exiting bends, the radar sensor message.
  • Page 270 Contact a If laser sensor operation is impaired, due to specialised workshop. SEAT recommends vis- heavy rain, spray, snow or mud, the ACC is iting a SEAT dealership. deactivated temporarily. The relevant text...
  • Page 271: Adaptive Cruise Control Acc

    The rear bumper should only be painted ● ● may come on in the external rear view mir- with paint authorised by SEAT. The blind rors and on the instrument panel, and fol- spot detector's functions may be limited or Introduction low any instructions they may give.
  • Page 272 Driving check certain functions. They will switch off Blind spot detector (BSD) after a few seconds. If there are no indications from the control lamp in the external rear view mirror, this means that the blind spot detector has not ›››...
  • Page 273 Driver assistance systems ››› In the case of retrofitted tinted windows or the outside Fig. 243. The sensors monitor there are any), and can also detect station- windows with tinted film, the indications of the both the blind spot and traffic behind the ve- ary objects such as dividers, and thus give an ›››...
  • Page 274 Driving Driving situations Schematic diagram: Passing situa- Fig. 244  tion with traffic behind the vehicle. Indication  from the blind spot detector in the left-hand ex- ternal mirror. Schematic diagram: Situation of Fig. 245  passing and then moving into the right-hand lane.
  • Page 275 Driver assistance systems in the case of special constructions to the If the system detects that someone else on You can interrupt the automatic braking by ● side of the vehicle, e.g., high or irregular divid- the road is approaching the rear of the vehi- stepping hard on the accelerator pedal or ›››...
  • Page 276: Seat Drive Profile

    Depending on the equipment fitted in the ve- Exit Assist ● hicle, SEAT Drive Profile can operate on the  trailer or other similar object. following functions: As soon as the driver starts to drive with a...
  • Page 277 In the event of a fault in the “Dual Ride” sus- Next to the gearbox lever: MODE but- Fig. 247 pension, the following message is displayed When operating SEAT Drive Profile, pay at- ton. on the instrument panel screen Fault: tention to all traffic: doing otherwise could shock absorber regulation cause an accident.
  • Page 278: Park Assist

    If the eco * page 275 mode has been se- circumstances this may prevent them from lected in SEAT Drive Profile*, and the accel- exit a parking space driving forwards from a ● detecting people or objects. erator is pressed beyond a hard point, the en- parallel space.
  • Page 279 ● Park Assist interrupts the manoeuvres for ment to clean the ultrasound sensors, do tem and its functions, SEAT recommends parking or exiting a parking space in any of not apply it directly unless very briefly and that you practice operating the Park Assist the following cases: always from a distance of more than 10 cm.
  • Page 280 Driving The parking manoeuvre does not end within While entering or exiting a parking space, a Trailer mode ● 6 minutes from the activation of automatic brief signal sounds to prompt the driver to The Park Assist system cannot be switched steering.
  • Page 281 Driver assistance systems Selecting a parking mode Overview of reduced displays for park- Fig. 249 ing modes: Parallel parking in reverse. Per-   pendicular parking in reverse. Perpendicular  parking forwards. mode is shown on the instrument panel dis- Action ›››...
  • Page 282 Driving Special case of perpendicular parking Action Action space to park forwards without driving past first Drive forward towards the parking space while Press the button once.  paying attention to traffic and stop the vehi- A control lamp on the button lights up when Action ...
  • Page 283 Driver assistance systems Park with Park Assist On the instrument panel display: per- Fig. 251 pendicular parking. Finding a parking space.  Parking position. Manoeuvring.   On the instrument panel display: paral- Fig. 252 lel parking. Finding a parking space. Park- ...
  • Page 284 Driving For parallel parking For perpendicular Do the following: Do the following: spaces parking spaces ››› Release the steering wheel in Introduc- Go forward until the ParkPilot continuous sig- tion on page 276. nal is heard. Do not exceed approxi- Do not exceed approxi- mately 40 km/h mately 20 km/h...
  • Page 285 Driver assistance systems Exiting a parking space with Park Do not exceed approximately 7 km/h ● For parallel parking spaces (4 mph) when exiting the parking space. Assist (only for parallel spaces) ››› Release the steering wheel in Introduc- tion on page 276.
  • Page 286: Parking Aid Parking And Manoeuvring

    Driving tomatically. After automatically activating For parallel parking spaces Always be ready to use the brakes your- ● the brakes, the manoeuvres to enter or exit a self! Go forward until the ParkPilot continuous sig- parking space may continue. The automatic braking intervention will ●...
  • Page 287 Driver assistance systems similar manoeuvres the driver always as- Ultrasound sensor signals may be affec- with rough or cobbled floors or ground ● – sumes the responsibility. ted by external sound sources. In certain with long grass; circumstances this may prevent them from Adapt your speed and driving style at all with external ultrasound sources, such ●...
  • Page 288: Parking System Plus

    ››› Fig. 254 SEAT Official Service or in a specialised warnings and visually on the Easy Connect workshop. system. Special features of ParkPilot with Area Please observe information on towing a ●...
  • Page 289 Driver assistance systems ››› Parking Aid operation 15 km/h (9 mph) page 287. The obstacle is Automatic activation detected from a distance of approx. 95 cm if the automatic connection is activated in the infotainment system. A reduced display is shown.
  • Page 290 Driving OR: place the selector lever in position P Segments of the visual indication Red segments: obstacles that are less than ● and then move it from this position. 30 cm away from the vehicle are dis- played in red. OR: switch on and off the automatic activa- ●...
  • Page 291 Driver assistance systems – deactivates the Automatic acti- parking aid is engaged in reverse, no audible In vehicles equipped with a towing bracket  ››› option page 287. signal of the existence of a fault will be is- device from the factory, when the trailer is vation sued.
  • Page 292: Rear Parking Aid

    Driving Rear parking aid* mph) for the front area and between 1.5 and Change from reduced view to full view 10 km/h (between 1 and 6 mph) for the rear. Engage reverse gear or turn the selector ● lever to position R. Following an intervention, the braking while Description manoeuvring function will be inactive in the...
  • Page 293 Driver assistance systems The selector lever is moved to position P. Segments of the visual indication Red segments: obstacles that are less than ● 30 cm away from the vehicle are dis- OR: the vehicle accelerates to approx. ● played in red. 15 km/h (9 mph) or faster.
  • Page 294: Rear Assist "Rear View Camera

    Driving Rear Assist “Rear View Cam- Adjust volume displayed on screen and could damage the vehicle. With the parking aid switched on, the active era”* audio/video source volume will be reduced to The rear assist has blind spots where it is ●...
  • Page 295 Familiarising yourself with the system To change these settings: To familiarise yourself with the system, the orientation lines and their function, SEAT rec- Park the vehicle in a safe place. ● ommends practising parking and manoeu- »...
  • Page 296 Driving too much traffic or in a car park when there Parking and manoeuvring with the The camera will stop transmitting images ● are good weather and visibility conditions. above the speed of 15 km/h (9 mph) with re- rear assist verse engaged.
  • Page 297: Towing Bracket Device

    2 m behind the The towing bracket device fitted to your vehi- Towing the vehicle with the detachable ball vehicle on the road surface. cle, be it factory-fitted or a genuine SEAT ac- ››› joint page cessory, meets all the national technical and...
  • Page 298 Driving ››› Description Key to Fig. 263 Placing in standby position 13-pin connector Safety lug Hook housing Hook housing cap Ball protective cover Detachable ball Locking lever Lock cover Release bolt Step 1. Fig. 264 Lock Locking balls Note Contact an Authorised Service Partner if you lose your key.
  • Page 299 Towing bracket device Step 1. Standby position Thus adjusted, the detachable ball is ready for installation. Turn the key in the direction of arrow ● til the part of the key with the holes reaches CAUTION ››› the top position Fig.
  • Page 300 Driving following the direction of arrow until it en- Assembling the detachable ball - Remove the key in the direction of arrow ● ››› gages audibly Step 2 Place cover in the lock in the direction of ● ››› ››› arrow Fig.
  • Page 301 Towing bracket device Checking proper attachment Remove cover from the lock in the direc- ● The towing bracket device should only be ● ››› tion of arrow Fig. 271. used if the detachable ball has been prop- erly locked! Insert key into the lock in the direction of ●...
  • Page 302: Trailer Towing

    Driving ››› Removing the detachable ball - Fit the cap Fig. 263 onto its housing. Operation and care ● Step 2 WARNING Put the cover on the housing cavity so that dirt cannot get in. Never leave the detachable ball loose in the luggage compartment.
  • Page 303 Towing bracket device Connectors only. The correct towing bracket figures for Trailer rear lights your specific model, which may be lower Your vehicle is fitted with a 13-pin connector The trailer's rear lights should comply with than these figures, are given in the vehicle ›››...
  • Page 304 Driving only powered when the engine is running. The ››› Key of the Schematic diagram Fig. 274: Never connect the trailer's electric sys- ● charge wire (pin 10) charges, for example, a tem directly to the electrical connections Meaning caravan battery. of the tail lights or any other power sour- ces.
  • Page 305 Towing bracket device Driving with a trailer Safety lug Note ››› The safety lug Fig. 275 is used to hook If there is any fault in the trailer's lighting, ● up the trailer's retainer cable. check the fuses in the instrument panel ›››...
  • Page 306 Driving The trailer is connected electrically to the You should always reduce speed immediately Requirements for the stabilisation of the ● towing vehicle by the trailer connector. if the trailer shows the slightest sign of snak- towing vehicle and trailer ing.
  • Page 307 Towing bracket device Retrofitting a towing bracket* The attachment points for the towing bracket When adjusting any settings, stop accel- ● are on the lower part of the vehicle. erating. The distance between the centre of the ball coupling and the ground should never be WARNING lower than the indicated value, even with a The electric stability control for the towing...
  • Page 308 Note SEAT recommends that the towing hooks ● be fitted at a specialised workshop. Con- sult your SEAT dealer in case additional modifications to your vehicle are necessa- Due to the specific design of the exhaust, ● the fitting of a conventional towing hook is...
  • Page 309: Practical Tips

    Despite a continuous observation of the mar- Accessories and modifi- cording to our specifications. Unauthorised ket, SEAT is not able to assess the reliability, modifications to the electronic components safety and suitability of parts that SEAT has cations to the vehicle or software in the vehicle may cause mal- not approved.
  • Page 310 ›››  page 46 A SEAT Official Service and specialised work- WARNING If the automatic filler nozzle is operated cor- shop will be able to inform you about options rectly, it will switch itself off as soon as the...
  • Page 311: Checking And Refilling Levels

    Checking and refilling levels Refuelling with natural gas WARNING CAUTION Fuel is highly flammable and can cause Fuel spills should be removed from the ● ● serious burns and other injuries. paintwork immediately. Never smoke or come into contact with Never run the tank completely dry.
  • Page 312: Refuelling

    Practical tips Fuel Press on the rear area of the flap and open ● of the natural gas can cause accidents se- rious burns and other injuries. Identification of the fuel Before refuelling with natural gas, en- ● Refuelling gage the filling mouth correctly. If you can Special feature: If the ambient temperature smell gas, stop refuelling immediately.
  • Page 313 If super is not available, if necessary, use nor- 3 Applies to vehicles: with petrol engine approved by SEAT. The products that con- mal 91 octane petrol (87 AKI). In this case only tain substances to increase the octane rat-...
  • Page 314 ● inferior nitrogen and carbon dioxide content start the engine under any circumstances. SEAT recommends filling the tank exclu- than type L. The higher the heating power of Risk of damaging the fuel system and the sively with petrol every 10,000 km to de- the natural gas, the lower the consumption engine! Obtain technical assistance.
  • Page 315: Adblue

    Updated information relating to natural gas ice life. For further information about the serv- WARNING quality is displayed on the instrument panel ice life of gas tanks, go to a SEAT dealer serv- If the vehicle underbody touches the ››› page 108.
  • Page 316 Practical tips ® ® AdBlue freezes at temperatures of -11°C Refilling AdBlue Fill with a refill bottle (+13°F). The system has heating elements Only use AdBlue ® that complies with ISO that guarantee its operation even at low tem- 22241-1. Only use original containers. peratures.
  • Page 317: Working In The Engine Compartment

    You can buy refill bottles that are adequate for AdBlue ® use at SEAT dealerships. All service fluids and consumables, e.g. cool- ant, engine oil, spark plugs and batteries, are under constant development. SEAT provides » a constant flow of information to Technical...
  • Page 318 Practical tips Services concerning modifications. For this where the jump leads are attached Never touch the electrical wiring of the – reason, we recommend you have service flu- ›››  page 59. The battery could explode. ignition system. ids and consumables replaced by a Techni- Never touch the radiator fan.
  • Page 319 Checking and refilling levels For the sake of the environment After closing the bonnet, always check Only open and close the bonnet when ● ● that it is properly secured by the locking there is nobody within its range. Service fluids leaks are harmful to the envi- mechanism in the lock carrier piece.
  • Page 320: Engine Oil

    Practical tips above. These operations are described in If the engine oil level is too low Note ››› page 315. You can get information about the correct en- Before a long trip, we recommend finding gine oil for your vehicle at your specialised an engine oil that conforms to the corre- Overview shop.
  • Page 321 Checking and refilling levels Checking engine oil level consumption is likely to be higher for the first WARNING 5,000 km. For this reason the engine oil level Oil is highly inflammable! Ensure that no oil must be checked at regular intervals, prefera- comes into contact with hot engine compo- bly when filling the tank and before a journey.
  • Page 322: Cooling System

    Practical tips Cover the coolant expansion tank cap with – WARNING quired, we recommend that you have the a cloth and carefully unscrew it to the left engine oil and filter changed by a Techni- Only change the engine oil yourself if you ›››...
  • Page 323: Brake Fluid

    The brake fluid level drops slightly when the If working inside the engine compart- ● proved by SEAT. Otherwise, you run the risk vehicle is being used as the brake pads are ment, remember that, even when the igni- of causing severe damage to the engine automatically adjusted as they wear.
  • Page 324: Windscreen Washer Reservoir

    You can buy VW 501 14 standard brake fluid in be added all-year-round. Please follow the Wipe off any brake fluid from the paintwork a SEAT dealership or a SEAT Official Service. dilution instructions on the packaging. immediately. If none is available, use only high-quality...
  • Page 325: Vehicle Battery

    Checking and refilling levels WARNING When working in the engine compart- and all electrical devices. The negative ca- ● ment, always observe the safety warnings ble on the battery must be disconnected. Always be aware of the danger of injury ›››...
  • Page 326 Practical tips Checking the battery electrolyte Transparent/light yellow: the battery must ● running. This could damage the electrical be replaced. Contact a specialised work- level system or electronic components. shop. Do not expose the battery to direct sun- ● The electrolyte level should be checked reg- light over a long period of time, as the in- ularly in high-mileage vehicles, in hot coun- tense ultraviolet radiation can damage the...
  • Page 327: Wheels

    Wheels and tyres safety features. driving carefully and at moderate speeds for about the first 500 km (300 miles). This will Genuine SEAT batteries meet the mainte- General notes also increase the useful life of the tyres. nance, performance and safety specifica- tions of your vehicle.
  • Page 328 In this wheel trims, we recommend that you consult way it becomes too hot, and this can cause with a SEAT Official Service centre for advice Location of the tyre pressure sticker. Fig. 283 tread separation and tyre blow-out. Always regarding current techniques.
  • Page 329 Wheels reason, the tyre pressure should be checked If the tyre pressure is too low or too high, ● ››› at least once per month page 326. the tyres will wear prematurely and the ve- hicle will not handle well. Risk of accident! Driving style Fast cornering, heavy acceleration and hard For the sake of the environment...
  • Page 330 Always observe the recommended and tyres which have been approved by tyre pressures. Tyre width in mm SEAT for your model. Failure to do so could If tyres show excessive wear, you should ● impair vehicle handling. Risk of accident.
  • Page 331 If the wheel bolts are not tightened cor- different sizes to those originally fitted by rectly, the wheel could become loose while SEAT can be fitted, and to find out about driving. Risk of accident. the combinations allowed between the The wheel bolts must be clean and turn front axle (axle 1) and the rear axle (axle 2).
  • Page 332: Spare Wheel (Temporary Spare Wheel)

    Practical tips Spare wheel (temporary The wheels of one axle are under more ● The driver is responsible for maintaining ● pressure (for example, driving with a trailer or correct tyre pressures. For this reason, tyre spare wheel)* on steep slopes). pressure must be regularly checked.
  • Page 333: Winter Service

    Wheels temporary spare wheel has been specially When replacing the spare wheel, place the ● Do not drive at over 80 km/h (50 mph) ● designed for your vehicle, thus, it cannot be subwoofer speaker in the direction indicated when the temporary spare wheel is fitted changed with the temporary spare wheel by the arrow and with the word “FRONT”...
  • Page 334 Practical tips tyre sizes listed in the vehicle documentation For the sake of the environment also apply to winter tyres. Fit your summer tyres again as soon as Winter tyres lose their effectiveness when the possible. They are quieter, do not wear so tread is worn down to a depth of 4 mm.
  • Page 335: Service

    Service Maintenance Service works Make sure that any repairs are carried ● out by a SEAT authorised service or speci- In the Digital Maintenance Plan, your SEAT alised workshop. authorised service or specialised workshop Service documents the following information: CAUTION When each one of the services was carried ●...
  • Page 336 Using the vehicle mostly in situations with a ● terval display At SEAT, the dates of the services are indica- lot of traffic and stops (e.g. in a city). ted by the service interval display on the in- The data are based on normal conditions of use.
  • Page 337: Additional Service Offers

    SEAT services or specialised work- spected specifically for this type of vehicle. shops. Original SEAT Spare Parts have been con- SEAT cannot be held liable for the safety and ceived for their vehicles and approved by suitability of parts from other manufacturers. CAUTION SEAT, with a special emphasis on safety.
  • Page 338: Warranty

    Maintenance Vehicle maintenance If your SEAT vehicle is immobilised due to a Washing the vehicle fault or an accident, our assistance services will help you keep moving. The longer you take to clean the tanks, e.g. Maintenance and cleaning remains of insects, bird excrements, tree resin...
  • Page 339 Vehicle maintenance Do not use a nozzle that sprays the water out Apply the product with a microfibre cloth. To view mirrors must always be folded/de- in a direct stream or one that has a rotating avoid damaging the surface of the paint, do ployed electrically! jet for forcing off dirt.
  • Page 340 Maintenance Wheels special questions or parts that are not listed. Problem Solution Take he general considerations into account Problem Solution ››› in Take special care with... on Have your specialised work- Corrosion shop take care of this page 341. Anti frost salt Water The water does Brake abrasion...
  • Page 341 Neutral soap solution: two tablespoons maximum in Neutral soap solution: two tablespoons maximum in 1 litre of water 1 litre of water Problem Solution Seat belts Natural leather Dirt Apply windscreen cleaner and Problem Solution then dry with a cloth...
  • Page 342 Do not use cleaning products that contain ● alcohol. Risk of cracks! Seat belts Covers/trims Do not remove the seat belts to clean them. ● Do not use cleaning products or chrome ● Wheels based cleaning agents. Seat belts and their components must nev- ●...
  • Page 343 Do not use steam cleaners, brushes, hard ● blades to make noise. sponges, etc. to clean. Do not turn on seat heating* to dry the ● Note seats. Remains of insects can be removed much ●...
  • Page 344: Information For The User

    These data will provide a better understand- face while the vehicle is switched on. ing of the circumstances of the accident. SEAT will not have access to EDR data unless Data from the driving assist systems are also the owner (or, in “Leasing” cases, the lessee recorded.
  • Page 345: Information About The Eu Directive 2014/53/Eu

    2014/53/EU laration of compli- laration of compli- ance ance Simplified EU compliance declara- Radio frequency re- Sender STH SEAT - Infotainment system MIB2 Entry tion mote control (auxili- 50000914 MIB Standard 2 ary heater) Your vehicle has different radioelectrical devi-...
  • Page 346 Max. station power Valid for models 433.05-434.78 MHz 10 mW (ERP) 433.05-434.79 MHz 10 mW Radiofrequency remote control (vehicle) All SEAT models 868.0-868.6 MHz 25 mW 434.42 MHz 32 µW 868.7-869.2 MHz (869.0 MHz) 0.24 mW, / –6.3 dBm e.r.p.
  • Page 347 Alhambra Auxiliary heating 868.7-869.2 MHz (869.0 MHz) 23.5 mW, / 13.7 dBm e.r.p. Ateca 2402-2480 MHz 6 dBm Bluethooth All SEAT models 2400-2483.5 MHz 10 dBm Wireless hotspot 2400-2483.5 MHz 10 dBm Leon and Ateca GSM 900: 880-915 MHz 33 dBm...
  • Page 348: Technical Specifications

    Technical data ››› Technical data Abbreviations used in the technical speci- Fig. 288. Additionally, the chassis number fications section is located in the engine compartment, on the right-hand side. The number is engraved on Kilowatt, engine power measurement. Technical specifications the top side rail, and is partially covered.
  • Page 349: Trailer Mode

    Technical specifications legislation in force at the time (for more infor- Drawbar loads WARNING mation, see the Publications Office of the Eu- The maximum permitted drawbar load on the Please note that the centre of gravity ● ropean Union on the EUR-Lex website: © Eu- ball coupling of the towing bracket must not may shift when transporting heavy objects;...
  • Page 350: Wheels

    Technical data Wheels Note We recommend that you ask your Techni- Tyre pressure and wheel bolts cal Service for information about appropri- ate wheel, tyre and snow chain size. Tyre pressure The sticker with the tyre pressure values can be found on the back of the left front door frame.
  • Page 351: Engine Data

    Technical specifications Engine data Petrol engines 1.0 TSI Start-Stop Power output in kW (PS) at 1/min 70 (95)/5,000-5,500 85 (115)/5,000-5,500 Maximum torque (Nm at 1/min) 175/2,000-3,500 200/2,000-3,500 No. of cylinders/displacement (cm 3/999 3/999 Fuel Super 95 / Normal 91 (with a slight power loss) ROZ Gearbox manual manual...
  • Page 352 Technical data Petrol engines 1.5 TSI Evo Start-Stop 1.6 MPI Power output in kW (PS) at 1/min 110 (150)/5,000-6,000 81 (110)/5,800 Maximum torque (Nm at 1/min) 250/1,500-3,500 155/3,800-4,000 No. of cylinders/displacement (cm 4/1,498 4/1,598 Fuel Super 95 / Normal 91 (with a slight power loss) ROZ Gearbox manual manual...
  • Page 353 Technical specifications Natural gas/petrol engines 1.0 TGI Start-Stop Power output in kW (PS) at 1/min 66 (90)/4,500-5,800 Maximum torque (Nm at 1/min) 160/1,900-3,500 No. of cylinders/displacement (cm 3/999 Fuel Super 95 / Normal 91 (with a slight power loss) ROZ Gearbox manual Top speed (km/h)
  • Page 354 Technical data Diesel engines 1.6 TDI CR Start-Stop Power output in kW (PS) at 1/min 70 (95)/2,750-4,600 85 (115)/3,250-4,000 Maximum torque (Nm at 1/min) 250/1,500-2,600 250/1,500-3,200 No. of cylinders/displacement (cm 4/1,598 4/1,598 Fuel Diesel according to standard EN 590, min. 51 CN Gearbox manual manual...
  • Page 355: Vehicle Data

    Technical specifications Vehicle data Dimensions » Dimensions and angles. Fig. 289...
  • Page 356 Technical data ››› Fig. 289 ARONA Front projection (mm) Rear projection (mm) Wheelbase (mm) 2,566 Length (mm) 4,138 Front track (mm) 1,503 Back track (mm) 1,486 Width (mm) 1,780 Height at kerb weight (mm) 1,552 Ground clearance between the axles (mm) Front projection angle limited by the bumper maximum 20.1°...
  • Page 357: Index

    ABS ......... 229 Adjusting the seat ......148 Anti-puncture .
  • Page 358 Index parking assistant (RCTA) ....269 Blind spot detector (BSD) ....269 parking system Plus .
  • Page 359 Coming Home Function ..... . 141 seat belt ........69 fabrics .
  • Page 360 Driving abroad rear seat passengers ..... . 66 Display ........103 headlights .
  • Page 361 Index EDS ......... 229 switching off temporarily .
  • Page 362 Index Exhaust filtering system Frequency band Fuses ........50, 91 catalytic converter .
  • Page 363 ......178 SEAT Drive Profile ......274 demisting the windscreen and side win- Radio mode .
  • Page 364 Index Telephone mode ......209 Jump leads ........59 Lighting of the instrument panel .
  • Page 365 Index Locking and unlocking Media main menu ....... . 199 in the door cylinder .
  • Page 366 Rear fog light seat belts ........73 ings .
  • Page 367 Running in Seat belts ........69 Rear window wiper blades brake pads .
  • Page 368 Lowering the volume ..... . . 174 right front seat ......153 Top Tether .
  • Page 369 ....... . 159 Unfasten the seat belt ......19 Towing a trailer .
  • Page 370 Index Vehicle documentation compartment ..153 new wheels ....... 328 Vehicle interior monitoring and anti-tow sys- removing and fitting .
  • Page 371 SEAT S.A. is permanently concerned about continuous development of its types and models. For this reason we ask you to understand, that at any given time, changes regarding shape, equipment and technique may take place on the car delivered. For this reason no right at all may derive based on the data, drawings and descriptions in this current handbook.

Table of Contents

Save PDF