Ateca 2017 ➤ , León 2013 ➤ , León ST 2013 ➤
4 cyl. petrol engine (1.8 l and 2.0 l with direct injection, 4 V, exhaust gas turbocharger, timing chain,
EA 888 III. Gen) - Edition 10.2018
2
Engine oil radiator
⇒ "2.1 Assembly overview - engine oil cooler", page 216
⇒ "2.2 Removing and installing engine oil cooler", page 216
⇒ "2.3 Removing and installing mechanical switching valve", page
218
2.1
Assembly overview - engine oil cooler
1 - Bracket for ancillary me‐
chanical units
❑ Removing and fitting
⇒ page 67
2 - Gasket
❑ Renew
3 - O-rings
❑ Renew
❑ Lubricate lightly with en‐
gine oil
4 - Mechanical switching valve
❑ Renew
permitted unless authorised by SEAT S.A. SEAT S.A does not guarantee or accept any liability with
5 - Engine oil radiator
❑ See note
⇒ page 200
❑ Removing and fitting
⇒ page 216
6 - Seal
❑ Renew
❑ Lubricate with coolant
7 - Connecting piece
8 - Bolt
❑ Renew
❑ 8 Nm +45°
2.2
Removing and installing engine oil cool‐
er
Special tools and workshop equipment required
216
Rep. gr.17 - Lubrication
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
respect to the correctness of information in this document. Copyright by SEAT S.A.
.