Seat Ateca 2017 Workshop Manual page 368

Ateca 2017 ➤ , León 2013 ➤ , León ST 2013 ➤
4 cyl. petrol engine (1.8 l and 2.0 l with direct injection, 4 V, exhaust gas turbocharger, timing chain,
EA 888 III. Gen) - Edition 10.2018
♦ Hose clip pliers - VAS 6362-
♦ Socket wrench - T10347-
Removing
– Remove engine cover panel
– Remove air filter housing
– Disconnect battery ⇒ Electrical system; Rep. gr. 27 ; Battery;
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
Disconnecting and connecting battery .
permitted unless authorised by SEAT S.A. SEAT S.A does not guarantee or accept any liability with
respect to the correctness of information in this document. Copyright by SEAT S.A.
– Free coolant hose -2-.
– Remove bolts -arrows-.
– Unclip front side of the air guide -1- by unlocking the retaining
tabs arrows. Remove in -direction of arrow-.
– Remove bolts -arrows- for coolant line from intake manifold.
– Remove noise insulation ⇒ General body repairs, exterior;
Rep. gr. 66 ; Noise insulation; Assembly overview - noise in‐
sulation .
360
Rep. gr.24 - Mixture preparation - injection
⇒ page 57 .
⇒ page 356 .