Cooling; Cooling System/Coolant; Connection Diagram - Coolant Hoses - Seat Ateca 2017 Workshop Manual

4 cyl. petrol engine (1.8 l and 2.0 l with direct injection, 4 V, exhaust gas turbocharger, timing chain,
19 –

Cooling

1

Cooling system/coolant

⇒ "1.1 Connection diagram - coolant hoses", page 233
⇒ "1.2 Draining and filling coolant", page 239
⇒ "1.3 Checking cooling system for leaks", page 244
⇒ "1.4 Flushing cooling system", page 247
⇒ "1.5 Flushing cooling system, quick reference guide",
page 266
1.1

Connection diagram - coolant hoses

⇒ "1.1.1 Connection diagram - Vehicles with manual gearbox",
page 233
⇒ "1.1.2 Schematic diagram, vehicles with dual clutch gearbox",
page 234
⇒ "1.1.3 Vehicles with dual clutch gearbox and auxiliary radiator
on the left side", page 236
⇒ "1.1.4 Vehicles with dual clutch gearbox and auxiliary radiator
on right and left sides", page 237
1.1.1 Connection diagram - Vehicles with manual gearbox
Note
♦ Blue = large coolant circuit.
Red = small coolant circuit.
♦
Brown = heater circuit.
♦
Yellow = gear oil cooling circuit.
♦
Arrows show direction of coolant flow.
♦
Vehicles without gear oil cooling
Ateca 2017 ➤ , León 2013 ➤ , León ST 2013 ➤
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by SEAT S.A. SEAT S.A does not guarantee or accept any liability with
respect to the correctness of information in this document. Copyright by SEAT S.A.
EA 888 III. Gen) - Edition 10.2018
1. Cooling system/coolant
233