Seat Ateca 2017 Workshop Manual page 125

4 cyl. petrol engine (1.8 l and 2.0 l with direct injection, 4 V, exhaust gas turbocharger, timing chain,
Special tools and workshop
equipment required
♦ Spark plug socket and extension - 3122 B-
♦ Compression tester - V.A.G 1763-
♦ Adapters - V.A.G 1381/1-
♦ Adapters - V.A.G 1381/5A-
Test procedure
Note
Min. engine oil temperature: 30 °C
♦
Min. battery voltage: 12.7 V
♦
– Remove engine cover panel
– Release electrical connectors at ignition coils and unplug from
ignition coils simultaneously.
– Remove bolts for ignition coils and pull out ignition coils.
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by SEAT S.A. SEAT S.A does not guarantee or accept any liability with
respect to the correctness of information in this document. Copyright by SEAT S.A.
⇒ page 57 .
Ateca 2017 ➤ , León 2013 ➤ , León ST 2013 ➤
EA 888 III. Gen) - Edition 10.2018
117
1. Cylinder head