Exhaust Gas Temperature Regulation; Assembly Overview - Exhaust Gas Temperature Regulation - Seat Ateca 2017 Workshop Manual

4 cyl. petrol engine (1.8 l and 2.0 l with direct injection, 4 V, exhaust gas turbocharger, timing chain,
3

Exhaust gas temperature regulation

⇒ "3.1 Assembly overview - exhaust gas temperature regulation",
page 445
⇒ "3.2 Removing and installing parts of exhaust gas temperature
regulation", page 446
3.1 Assembly overview - exhaust gas tem‐
perature regulation
Assembly overview - exhaust gas temperature regulation, front-
wheel drive
1 - Temperature sender before
particulate filter - G506-
❑ Removing or installing
⇒ page 446
❑ 45 Nm
2 - Temperature sender after
particulate filter - G527-
❑ Removing or installing
⇒ page 448
❑ 45 Nm
Assembly overview - exhaust gas temperature regulation, all-
wheel drive
Ateca 2017 ➤ , León 2013 ➤ , León ST 2013 ➤
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by SEAT S.A. SEAT S.A does not guarantee or accept any liability with
respect to the correctness of information in this document. Copyright by SEAT S.A.
EA 888 III. Gen) - Edition 10.2018
3. Exhaust gas temperature regulation
445